Система Sfi Порядок Проведения Активной Диагностики. Corolla Auris

Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Система Управления Двигателем 2Zr-Fe. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. CHECK MODE PROCEDURE (Using intelligent tester)

Система Sfi -- Порядок Проведения Активной Диагностики


УКАЗАНИЕ:
Intelligent tester only:
Compared to normal mode, check mode is more sensitive to the malfunctions. Therefore, check mode can detect the malfunctions that cannot be detected by normal mode.
ПРИМЕЧАНИЕ:
All the stored DTCs and freeze frame data are erased if: 1) the ECM is changed from normal mode to check mode or vice versa; or 2) the ignition switch is turned from on (IG) to on (ACC) or off while in check mode. Before changing modes, always check and make a note of any DTCs and freeze frame data.

CHECK MODE PROCEDURE (Using intelligent tester)

  1. Check and ensure the following conditions:

    1. Battery positive voltage is 11 V or more.

    2. Throttle valve is fully closed.

    3. Transmission is in the neutral position.

    4. Air conditioning switch is off.

  2. Turn the ignition switch off.

  3. Connect the intelligent tester to the DLC3.

  4. Turn the ignition switch on (IG) and turn the tester on.

  5. Select the following menu items: Utility / Check Mode.

  6. Switch the ECM from normal mode to check mode.



    7. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Система Управления Двигателем 2Zr-Fe.Система Sfi.Система Sfi Порядок Проведения Активной Диагностики

  7. Make sure that the MIL flashes as shown in the illustration.

  8. Start the engine.

  9. Make sure that the MIL turns off.

  10. Simulate the conditions of the malfunction described by the customer.

  11. Check for DTCs and freeze frame data using the tester.