Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE ENGINE MECHANICAL
CYLINDER BLOCK - REPLACEMENT
| 1. REPLACE STRAIGHT PIN |
- NOTICE:
- It is not necessary to remove the straight pin unless it is being replaced.
Remove the straight pins.
Using a plastic-faced hammer, tap in new straight pins to the cylinder block.
| *A | Upper Side | *B | Front Side |
| *C | Lower Side | *D | Rear Side |
- Standard Protrusion:
Item Pin Diameter Specified Condition Pin A 10 mm (0.394 in.) 23 mm (0.906 in.) Pin B 10 mm (0.394 in.) 11 mm (0.433 in.) Pin C 8 mm (0.315 in.) 9 mm (0.354 in.) Pin D 4 mm (0.157 in.) 6 mm (0.236 in.)