Install 2 new gaskets and the 2 straight screw plugs.

Using an E7 "TORX" wrench, replace the stud bolts labeled A shown in the illustration below.

Visually check the cylinder for vertical scratches.

If necessary, replace the cylinder block.

Using a dial indicator, measure the thrust clearance while moving the connecting rod back and forth.

• Standard thrust clearance:
• 0.14 to 0.54 mm (0.00551 to 0.0213 in.)

• Maximum thrust clearance:
• 0.60 mm (0.0236 in.)

If the thrust clearance is more than the maximum, replace one or more connecting rods as necessary.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 1VD-FTV ENGINE MECHANICAL

Using an E8 "TORX" socket wrench, install the stud bolts.

Remove the straight pins.

Push the check valve with a pin to check if it is stuck.

If stuck, replace the No. 1 oil nozzle sub-assembly.

Using a dial indicator, measure the thrust clearance while moving the connecting rod back and forth.

• Standard thrust clearance:
• 0.15 to 0.55 mm (0.00591 to 0.0217 in.)

• Maximum thrust clearance:
• 0.70 mm (0.0276 in.)

If the thrust clearance is more than the maximum, replace one or more connecting rods as necessary.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE ENGINE MECHANICAL