Power Seat Switch (W/O Seat Position Memory System) - Inspection

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT

INSPECT FRONT POWER SEAT SWITCH LH

INSPECT FRONT POWER SEAT SWITCH RH

POWER SEAT SWITCH (w/o Seat Position Memory System) - INSPECTION

1. INSPECT FRONT POWER SEAT SWITCH LH

Power Seat Switch (W/O Seat Position Memory System) - Inspection. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Slide Switch:
Tester Connection Switch Condition Specified Condition
9 (SLD+) - 1 (+B) Front Below 1 Ω
6 (SLD-) - 4 (GND)
9 (SLD+) - 4 (GND) Off
6 (SLD-) - 4 (GND)
9 (SLD+) - 4 (GND) Rear
6 (SLD-) - 1 (+B)
Front Vertical Switch:
Tester Connection Switch Condition Specified Condition
10 (FRV+) - 1 (+B) Up Below 1 Ω
5 (FRV-) - 4 (GND)
10 (FRV+) - 4 (GND) Off
5 (FRV-) - 4 (GND)
10 (FRV+) - 4 (GND) Down
5 (FRV-) - 1 (+B)
Lifter Switch:
Tester Connection Switch Condition Specified Condition
7 (LFT+) - 1 (+B) Up Below 1 Ω
8 (LFT-) - 4 (GND)
7 (LFT+) - 4 (GND) Off
8 (LFT-) - 4 (GND)
7 (LFT+) - 4 (GND) Down
8 (LFT-) - 1 (+B)
Reclining Switch:
Tester Connection Switch Condition Specified Condition
3 (RCL+) - 1 (+B) Front Below 1 Ω
2 (RCL-) - 4 (GND)
3 (RCL+) - 4 (GND) Off
2 (RCL-) - 4 (GND)
3 (RCL+) - 4 (GND) Rear
2 (RCL-) - 1 (+B)

If the result is not as specified, replace the front power seat switch.

2. INSPECT FRONT POWER SEAT SWITCH RH

Power Seat Switch (W/O Seat Position Memory System) - Inspection. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Slide Switch:
Tester Connection Switch Condition Specified Condition
9 (SLD+) - 1 (+B) Front Below 1 Ω
6 (SLD-) - 4 (GND)
9 (SLD+) - 4 (GND) Off
6 (SLD-) - 4 (GND)
9 (SLD+) - 4 (GND) Rear
6 (SLD-) - 1 (+B)
Front Vertical Switch:
Tester Connection Switch Condition Specified Condition
5 (FRV+) - 1 (+B) Up Below 1 Ω
10 (FRV-) - 4 (GND)
5 (FRV+) - 4 (GND) Off
10 (FRV-) - 4 (GND)
5 (FRV+) - 4 (GND) Down
10 (FRV-) - 1 (+B)
Lifter Switch:
Tester Connection Switch Condition Specified Condition
8 (LFT+) - 1 (+B) Up Below 1 Ω
7 (LFT-) - 4 (GND)
8 (LFT+) - 4 (GND) Off
7 (LFT-) - 4 (GND)
8 (LFT+) - 4 (GND) Down
7 (LFT-) - 1 (+B)
Reclining Switch:
Tester Connection Switch Condition Specified Condition
3 (RCL+) - 1 (+B) Front Below 1 Ω
2 (RCL-) - 4 (GND)
3 (RCL+) - 4 (GND) Off
2 (RCL-) - 4 (GND)
3 (RCL+) - 4 (GND) Rear
2 (RCL-) - 1 (+B)

If the result is not as specified, replace the front power seat switch.