Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SUPPLEMENTAL RESTRAINT SYSTEMS
FRONT SEAT SIDE AIRBAG ASSEMBLY (for Manual Seat) - REMOVAL
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
| 1. REMOVE FRONT SEAT ASSEMBLY LH |
Remove the front seat assembly LH ().
| 2. REMOVE VERTICAL ADJUSTER COVER LH (for 8 Way Seat Type) |
Using a screwdriver, detach the 2 claws and remove the vertical adjuster cover LH.
- HINT:
- Tape the screwdriver tip before use.
| 3. REMOVE VERTICAL ADJUSTING HANDLE LH (for 8 Way Seat Type) |
Remove the 2 screws and vertical adjusting handle LH.
| 4. REMOVE VERTICAL SEAT ADJUSTER KNOB (for 8 Way Seat Type) |
Remove the snap ring and vertical seat adjuster knob.
| 5. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH |
Lift the reclining adjuster release handle LH.
Using a screwdriver, detach the claw and remove the reclining adjuster release handle LH.
- HINT:
- Tape the screwdriver tip before use.
| 6. REMOVE FRONT SEAT CUSHION SHIELD LH |
w/ Seatback Board:
Disconnect the 2 rubber bands from the 2 hooks.
w/o Seatback Board:
Disconnect the rubber band from the 2 hooks.
for 4 Way Seat Type:
Remove the 2 screws.
Detach the 3 claws in the order shown in the illustration, and then remove the front seat cushion shield LH.
for 8 Way Seat Type:
Remove the 3 screws.
Detach the 3 claws in the order shown in the illustration, and then remove the front seat cushion shield LH.
w/ Lumbar Support:
Disconnect the lumbar switch connector.
| 7. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH |
Disconnect the connectors and detach the clamps.
Remove the nut and front seat inner belt assembly.
Remove the front seat belt anchor plate.
| 8. REMOVE FRONT INNER SEAT CUSHION SHIELD LH |
Remove the screw.
Detach the claw and clip, and then remove the front inner seat cushion shield LH.
| 9. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH (w/ Seatback Board) |
Remove the 2 screws.
Move the front seatback board sub-assembly LH in the direction of the arrow to detach the 2 hooks and remove it.
| 10. REMOVE FRONT SEAT HEADREST SUPPORT (w/ Active Headrest) |
Detach the 4 claws and remove the 2 front seat headrest supports.
| 11. REMOVE SEATBACK COVER WITH PAD |
w/ Seatback Board:
Remove the 3 hog rings and detach the 9 hooks.
w/ Front Seat Side Airbag:
Remove the nut and seatback cover bracket from the seat frame.
w/o Seatback Board:
Remove the 3 hog rings.
Open the 2 fasteners, and then open the front separate type seatback cover.
w/ Front Seat Side Airbag:
Remove the nut and seatback cover bracket from the seat frame.
Detach the 4 claws and remove the 2 front seat headrest supports.
Remove the seatback cover with pad from the seatback frame.
| 12. REMOVE FRONT SEAT AIRBAG ASSEMBLY LH |
Detach the 5 clamps and disconnect the wire harness.
Detach the 2 clamps and disconnect the wire harness.
Remove the 2 nuts and front seat airbag assembly LH.
- CAUTION:
- Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.