Front Passenger Airbag Assembly - Removal

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SUPPLEMENTAL RESTRAINT SYSTEMS

FRONT PASSENGER AIRBAG ASSEMBLY - REMOVAL

  • HINT:
Use the same procedures for the RHD and LHD.
The procedures listed below are the LHD side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
  • CAUTION:
  • Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
  • NOTICE:
After the ignition switch is turned off, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch off, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
2. REMOVE INSTRUMENT PANEL SAFETY PAD

Remove the instrument panel safety pad ().

3. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
Front Passenger Airbag Assembly - Removal. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the claw and remove the wire.

Disconnect the 2 connectors and remove the instrument panel wire from the front passenger airbag.

  • NOTICE:
  • When handling the airbag connector, take care not to damage the airbag wire harness.
Front Passenger Airbag Assembly - Removal. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 screws.

Front Passenger Airbag Assembly - Removal. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 5 hooks (A).

Detach the 5 hooks (B) and remove the front passenger airbag from the instrument panel.