Ignition Key Cylinder Light - Installation

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING INT

IGNITION KEY CYLINDER LIGHT - INSTALLATION

  • HINT:
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1. INSTALL TRANSPONDER KEY AMPLIFIER
Ignition Key Cylinder Light - Installation. LIGHTING INT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the connector.

Align the claw of the transponder key amplifier with the upper bracket.

Push in the transponder key amplifier and install it to the upper bracket.

  • NOTICE:
  • Do not push in the transponder key amplifier with excessive force as it may be damaged.
2. INSTALL UPPER STEERING COLUMN COVER
Ignition Key Cylinder Light - Installation. LIGHTING INT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the claw to install the upper steering column cover.

Attach the 4 clips to install the upper steering column cover onto the instrument cluster finish panel.

3. INSTALL LOWER STEERING COLUMN COVER
Ignition Key Cylinder Light - Installation. LIGHTING INT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the lower steering column cover.

  • NOTICE:
  • Do not damage the tilt and telescopic switch.

Install the 3 screws.

  • Torque:
  • 2.0 N*m{ 20 kgf*cm, 18 in.*lbf}