Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - THEFT DETERRENT / KEYLESS ENTRY
ELECTRICAL KEY OSCILLATOR (for Outside Luggage Compartment) - REMOVAL
| 1. REMOVE PINTLE HOOK ASSEMBLY (w/ Pintle Hook) |
Remove the pintle hook assembly ().
| 2. REMOVE SPARE WHEEL CARRIER SUB-ASSEMBLY (w/ Tire Carrier) |
Remove the spare wheel carrier sub-assembly ().
| 3. REMOVE REAR QUARTER PANEL MUDGUARD LH |
Remove the clip.
Using a T30 "TORX" socket, remove the 6 screws and mudguard.
| 4. REMOVE REAR QUARTER PANEL MUDGUARD RH |
Remove the clip.
Using a T30 "TORX" socket, remove the 7 screws and mudguard.
| 5. REMOVE REAR NO. 1 BUMPER PLATE |
Put protective tape around the rear No. 1 bumper plate.
Detach the 20 claws and remove the rear No. 1 bumper plate.
| *1 | Protective Tape | - | - |
| 6. REMOVE REAR BUMPER COVER |
- HINT:
- For the rear bumper cover with tire carrier, use the procedures described below.
Put protective tape around the rear bumper cover.
| *1 | Protective Tape | - | - |
Open the tail gate and remove the 4 clips.
Close the tail gate.
Remove the 7 bolts, 6 screws and 2 clips.
Detach the 14 claws and remove the rear bumper cover.
w/ TOYOTA Parking Assist-sensor System or w/ Rear Fog Light:
Disconnect the No. 2 frame wire connector.
| 7. REMOVE REAR BUMPER ARM BRACKET LH |
Disconnect the connector.
Remove the 2 bolts and rear bumper arm bracket LH.
| 8. REMOVE ELECTRICAL KEY ANTENNA |
Remove the 2 screws and antenna.