Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR LOCK
DOOR CONTROL TRANSMITTER (w/o Entry and Start System) - INSTALLATION
- NOTICE:
- Take extra care when handling these precision electronic components.
| 1. INSTALL TRANSMITTER BATTERY |
Install the battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.
- NOTICE:
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.
Be careful not to bend the transmitter battery electrode during insertion.
Keep the transmitter cover interior free of dust and oil.
Install the transmitter battery cover.
- NOTICE:
- When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.
| 2. INSTALL DOOR CONTROL TRANSMITTER MODULE |
Install the door control transmitter module.
- NOTICE:
- When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.
| 3. INSTALL TRANSMITTER HOUSING COVER |
Install the transmitter housing cover to the transmitter housing case.
Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.