Ultrasonic Sensor (For Rear) - Removal

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARK ASSIST / MONITORING

ULTRASONIC SENSOR (for Rear) - REMOVAL

1. REMOVE REAR BUMPER COVER

for Standard:


().

w/ Towing Hitch:


().

w/ Pintle Hook:


().

2. REMOVE NO. 2 FRAME WIRE

for Standard:


().

w/ Towing Hitch:


().

w/ Pintle Hook:


().

3. REMOVE NO. 1 ULTRASONIC SENSOR
Ultrasonic Sensor (For Rear) - Removal. PARK ASSIST / MONITORING. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 claws and remove the No. 1 ultrasonic sensor.

  • HINT:
Use the same procedure for all No. 1 ultrasonic sensors.
The illustration shows the No. 1 ultrasonic sensor for the RH corner and back sensor LH and RH. The installation position of the No. 1 ultrasonic sensor for the LH corner is on the opposite side.
4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER
Ultrasonic Sensor (For Rear) - Removal. PARK ASSIST / MONITORING. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 claws and remove the No. 1 ultrasonic sensor retainer from the rear bumper cover.

  • HINT:
Use the same procedure to remove the No. 1 ultrasonic sensor retainer on the other side.
The illustration shows the No. 1 ultrasonic sensor retainer for the RH corner. The vertical orientation of the No. 1 ultrasonic sensor retainers for the LH corner is opposite that of the image shown in the illustration.
5. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER
Ultrasonic Sensor (For Rear) - Removal. PARK ASSIST / MONITORING. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 claws and remove the No. 2 ultrasonic sensor retainer from the rear bumper cover.

  • HINT:
  • Use the same procedure to remove the No. 2 ultrasonic sensor retainer on the other side.