Rear View Monitor System - How To Proceed With Troubleshooting

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARK ASSIST / MONITORING


REAR VIEW MONITOR SYSTEM - HOW TO PROCEED WITH TROUBLESHOOTING

  • HINT:
  • Use the following procedures to troubleshoot the rear view monitor system.

1.VEHICLE BROUGHT TO WORKSHOP
NEXT
2.CUSTOMER PROBLEM ANALYSIS
NEXT
3.INSPECT BATTERY VOLTAGE
  • Standard voltage:
  • 11 to 14 V

If the voltage is below 11 V, replace or recharge the battery before proceeding.

NEXT
4.CHECK DTC OF NAVIGATION SYSTEM

Refer to the DTC Check / Clear procedures of the navigation system ().

Result
ResultProceed to
DTC is not outputA
DTC is outputB
B.
Go to NAVIGATION SYSTEM ()
A
5.PROBLEM SYMPTOM CONFIRMATION
Result
ResultProceed to
Symptom does not occurA
Symptom occursB
A.
Go to step 7
B
6.SYMPTOM SIMULATION
NEXT
7.CHECK IF SAME SYMPTOM APPEARS IN OTHER SYSTEM
Result
ResultProceed to
Symptom does not appearA
Symptom appears (Audio and Visual System [w/ Navigation System])B
Symptom appears (Navigation System)C
Symptom appears (Rear Seat Entertainment System)D
B.
Go to AUDIO AND VISUAL SYSTEM (w/ Navigation System)
C.
Go to NAVIGATION SYSTEM
D.
G0 to REAR SEAT ENTERTAINMENT SYSTEM
A
8.PROBLEM SYMPTOMS TABLE

Refer to the Problem Symptoms Table ().

Result
ResultProceed to
Fault is not listed in problem symptoms tableA
Fault is listed in problem symptoms tableB
B.
ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE
A
9.BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW

Terminals of ECU ().

NEXT
10.ADJUST, REPAIR OR REPLACE
NEXT
11.CONFIRMATION TEST
NEXT
END