Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARKING BRAKE
PARKING BRAKE ASSEMBLY - REASSEMBLY
- HINT:
| 1. INSTALL PARKING BRAKE ANCHOR BLOCK |
Install the anchor block with the 2 nuts.
- Torque:
- 86 N*m{ 877 kgf*cm, 63 ft.*lbf}
| 2. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY |
Connect the No. 3 parking brake cable with the bolt.
- Torque:
- 8.0 N*m{ 82 kgf*cm, 71 in.*lbf}
| 3. INSTALL PARKING BRAKE SHOE LEVER LH |
Apply high temperature grease to the parking brake anchor block.
Install the parking brake shoe lever to the No. 3 parking brake cable.
- NOTICE:
- Be carefully to distinguish between the parking brake shoe lever RH and LH.
| 4. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY LH |
Apply high temperature grease to the areas of the backing plate that contact the shoe.
Using SST, install the No. 2 parking brake shoe with the shoe hold down spring pin, compression spring and shoe hold down spring cup.
- SST
- 09718-00011
| 5. INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY LH |
Apply high temperature grease to the areas of the backing plate that contact the shoe.
Apply high temperature grease to the thread and all joining areas of the parking brake shoe adjuster screw set.
Set the No. 1 parking brake shoe and shoe adjuster screw set in place.
Connect the tension spring.
Using SST, install the shoe hold down spring pin, compression spring and shoe hold down spring cup.
- SST
- 09718-00011
| 6. INSTALL PARKING BRAKE SHOE RETURN SPRING |
Using SST, install the shoe return spring.
- SST
- 09703-30011
| 7. CHECK PARKING BRAKE INSTALLATION |
Check that each part is installed properly.
| 8. INSTALL REAR DISC |
While aligning the matchmarks, install the rear disc.
| 9. CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH |
Connect the rear disc brake cylinder with 2 new bolts.
- Torque:
- 95 N*m{ 969 kgf*cm, 70 ft.*lbf}
- NOTICE:
| 10. ADJUST PARKING BRAKE |
()
| 11. INSTALL REAR WHEEL LH |
- Torque:
- for Aluminum Wheel:
- 131 N*m{ 1336 kgf*cm, 97 ft.*lbf}
- for Steel Wheel:
- 209 N*m{ 2131 kgf*cm, 154 ft.*lbf}