Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - BRAKE REAR
REAR BRAKE FLEXIBLE HOSE - REMOVAL
- HINT:
Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
| 1. REMOVE REAR WHEEL |
| 2. DRAIN BRAKE FLUID |
- NOTICE:
- Wash off brake fluid immediately if it comes in contact with any painted surface.
| 3. REMOVE REAR FLEXIBLE HOSE LH |
Remove the union bolt and gasket, and then remove the flexible hose from the disc brake cylinder.
Disconnect the brake tube from the flexible hose with a union nut wrench while holding the flexible hose with a wrench.
- NOTICE:
Do not bend or damage the brake tube.
Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.
Remove the clip.
| 4. REMOVE REAR FLEXIBLE HOSE |
Disconnect each brake tube from the flexible hose with a union nut wrench while holding the flexible hose with a wrench.
Remove the 2 clips.
Remove the flexible hose.
Disconnect each brake tube from the flexible hose with a union nut wrench while holding the flexible hose with a wrench.
Remove the 2 clips.
Remove the flexible hose.
| 5. REMOVE NO. 6 FLEXIBLE HOSE BRACKET |
Remove the bolt and bracket from the rear axle housing.