Система Механической Трансмиссии 'Multimode' Процедура Поиска Неисправностей. Corolla ZZE150

Трансмиссия. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Механическая Трансмиссия 'Multimode' C53A. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. VEHICLE BROUGHT TO WORKSHOP

  2. CUSTOMER PROBLEM ANALYSIS

  3. CONNECT INTELLIGENT TESTER TO DLC3

  4. CHECK CAN COMMUNICATION SYSTEM

  5. CHECK DTC AND FREEZE FRAME DATA

  6. CLEAR DTC AND FREEZE FRAME DATA

  7. VISUAL INSPECTION

  8. PROBLEM SYMPTOM CONFIRMATION

  9. SYMPTOM SIMULATION

  10. DTC CHECK

  11. DTC CHART

  12. ТАБЛИЦА ПРИЗНАКОВ НЕИСПРАВНОСТЕЙ

  13. PART INSPECTION

  14. CIRCUIT INSPECTION

  15. IDENTIFICATION OF PROBLEM

  16. ADJUSTMENT, REPAIR OR REPLACE

  17. CONFIRMATION TEST

Система Механической Трансмиссии 'Multimode' -- Процедура Поиска Неисправностей




1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

      NEXT


      3.CONNECT INTELLIGENT TESTER TO DLC3
        УКАЗАНИЕ:
        If the display indicates a communication fault in the tool, inspect the DLC3.

      NEXT


      4.CHECK CAN COMMUNICATION SYSTEM

      1. Check for output DTCs.

        Result:
        Result
        		Proceed to
        No CAN system DTC output
        		A
        CAN system DTC output
        		B
        УКАЗАНИЕ:
        The ECM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, check that there is no trouble in the CAN communication system (See page Нажмите здесь).


      		B.
      PROCEED TO CAN COMMUNICATION SYSTEM
      A


      5.CHECK DTC AND FREEZE FRAME DATA
        ПРИМЕЧАНИЕ:
        Record or print DTCs and freeze frame data, if necessary. Refer to the relevant pages (See page Нажмите здесь).

      NEXT


      6.CLEAR DTC AND FREEZE FRAME DATA
        УКАЗАНИЕ:
        Refer to the relevant pages (See page Нажмите здесь).

      NEXT


      7.VISUAL INSPECTION

        NEXT


        8.PROBLEM SYMPTOM CONFIRMATION
          Result:
          Result
          		Proceed to
          Symptom does not occur
          		A
          Symptom occurs
          		B


        		B.
        Go to step 10
        A


        9.SYMPTOM SIMULATION
          УКАЗАНИЕ:
          Refer to the relevant pages (See page Нажмите здесь).

        NEXT


        10.DTC CHECK
          Result:
          Result
          		Proceed to
          DTC output
          		A
          No DTC output
          		B
          УКАЗАНИЕ:
          Refer to the relevant pages (See page Нажмите здесь).


        		B.
        Go to step 12
        A


        11.DTC CHART
          УКАЗАНИЕ:
          Refer to the relevant pages (See page Нажмите здесь).

        NEXT

        Go to step 14


        12.ТАБЛИЦА ПРИЗНАКОВ НЕИСПРАВНОСТЕЙ
          УКАЗАНИЕ:
          Refer to the relevant pages (See page Нажмите здесь).

        NEXT


        13.PART INSPECTION


          		NEXT.
          Go to step 16

          14.CIRCUIT INSPECTION

            NEXT


            15.IDENTIFICATION OF PROBLEM

              NEXT


              16.ADJUSTMENT, REPAIR OR REPLACE

                NEXT


                17.CONFIRMATION TEST

                  NEXT

                  END