Радиатор Снятие. Corolla Auris
Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
REMOVE FRONT BUMPER ASSEMBLY
REMOVE FRONT BUMPER ENERGY ABSORBER
REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
REMOVE NO. 1 ENGINE UNDER COVER
REMOVE UPPER RADIATOR AIR DEFLECTOR
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE BATTERY CLAMP SUB-ASSEMBLY
REMOVE BATTERY
REMOVE BATTERY TRAY
DRAIN ENGINE COOLANT
REMOVE THERMISTOR ASSEMBLY
REMOVE HOOD LOCK ASSEMBLY
REMOVE INJECTOR DRIVER
REMOVE RADIATOR SUPPORT SUB-ASSEMBLY
REMOVE VACUUM TRANSMITTING HOSE ASSEMBLY
DISCONNECT AIR HOSE
DISCONNECT NO. 1 RADIATOR HOSE
DISCONNECT NO. 2 RADIATOR HOSE
REMOVE RADIATOR ASSEMBLY
REMOVE FAN SHROUD
| 1. REMOVE FRONT BUMPER ASSEMBLY |
- УКАЗАНИЕ:
- See page Нажмите здесь
| 2. REMOVE FRONT BUMPER ENERGY ABSORBER |
Снимите передний поглотитель энергии удара с усилителя переднего бампера.
| 3. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
Расцепите все зажимы.
Выверните 8 болтов и снимите усилитель переднего бампера.
| 4. REMOVE NO. 1 ENGINE UNDER COVER |
| 5. REMOVE UPPER RADIATOR AIR DEFLECTOR |
Remove the 6 clips and upper radiator air deflector.
| 6. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 7. REMOVE BATTERY CLAMP SUB-ASSEMBLY |
Remove the bolt and loosen the nut.
Detach the hook of the battery clamp from the battery carrier, and then remove the battery clamp.
Loosen the radiator drain cock plug.
- УКАЗАНИЕ:
- Collect the coolant in a container and dispose of it according to the regulations in your area.
Remove the radiator reservoir cap.
- ПРЕДОСТЕРЕЖЕНИЕ:
- Do not remove the radiator reservoir cap while the engine and radiator are still hot.
- Pressurized, hot engine coolant and steam may be released and cause serious burns.
Loosen the cylinder block drain cock plug.
- УКАЗАНИЕ:
- The plug is on the backside of the generator on the exhaust manifold side.
| 11. REMOVE THERMISTOR ASSEMBLY |
Remove the clip and separate the thermistor assembly.
| 12. REMOVE HOOD LOCK ASSEMBLY |
- УКАЗАНИЕ:
- w/o Engine Hood Courtesy Switch: See page Нажмите здесь
- w/ Engine Hood Courtesy Switch: See page Нажмите здесь
| 13. REMOVE INJECTOR DRIVER |
Remove the 2 clamps and disconnect the 3 injector driver connectors.
Remove the 2 bolts, separate the clip then remove the injector driver assembly.
Remove the 4 bolts then remove the injector driver.
| 14. REMOVE RADIATOR SUPPORT SUB-ASSEMBLY |
Disconnect the horn connector.
Remove the 2 bolts, 2 clamps and the radiator reserve tank hose from the radiator support sub-assembly.
Disconnect the 2 connectors and clamp.
Disconnect the clamp and hose.
Remove the 2 bolts and 2 upper radiator supports.
Remove the 2 radiator support cushions.
Remove the 4 bolts, upper radiator support sub-assembly LH and upper radiator support sub-assembly RH.
Remove the 4 bolts and radiator support sub-assembly.
| 15. REMOVE VACUUM TRANSMITTING HOSE ASSEMBLY |
Disconnect the vacuum transmitting hose assembly.
Separate the No. 2 and No. 3 air hoses.
- УКАЗАНИЕ:
- Pull out the air hoses after the retainer is opened.
| 17. DISCONNECT NO. 1 RADIATOR HOSE |
Disconnect the No. 1 radiator hose from the radiator.
| 18. DISCONNECT NO. 2 RADIATOR HOSE |
Disconnect the No. 2 radiator hose from the radiator.
| 19. REMOVE RADIATOR ASSEMBLY |
Remove the radiator assembly with the fan shroud.
- ПРИМЕЧАНИЕ:
- For vehicles with the air conditioning system, do not apply any excessive force to the cooler condenser assembly or pipe when removing the radiator assembly.
Remove the 2 radiator support cushions.
Remove the vacuum hose.
Remove the 8 bolts, lower radiator support sub-assembly LH, lower radiator support sub-assembly RH and intercooler.
Remove the 2 bolts and fan shroud.
