Dtc C2176/76 Receiver Error
DESCRIPTION
INSPECTION PROCEDURE
CHECK DTC OUTPUT (C2176/76)
DTC C2176/76 Receiver Error
DESCRIPTION
The signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves.
| DTC No. | DTC Detection Condition | Trouble Area |
| C2176/76 | Malfunction in the tire pressure warning ECU and receiver internal circuit | Tire pressure warning ECU and receiver |
INSPECTION PROCEDURE
When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the GTS and write them down before removal.
It is necessary to perform initialization () after registration () of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.
| 1.CHECK DTC OUTPUT (C2176/76) |
Turn the engine switch off.
Turn the engine switch on (IG) and check for DTCs ().
- OK:
- DTC C2176/76 is not output.
| | REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER ()
|
|
|
| OK | |
| |
| CHECK FOR INTERMITTENT PROBLEMS ()
|
|