Tire Pressure Warning System - Dtc Check / Clear

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - TIRE PRESSURE MONITORING


TIRE PRESSURE WARNING SYSTEM - DTC CHECK / CLEAR

CHECK DTC (USING THE GTS)

Turn the engine switch off.

Connect the GTS to the DLC3.

Turn the engine switch on (IG).

Turn the GTS on.

Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.

Read the DTCs.

CHECK DTC (USING SST CHECK WIRE)
Tire Pressure Warning System - Dtc Check / Clear. TIRE PRESSURE MONITORING. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Turn the engine switch off.

Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

  • SST
  • 09843-18040

Turn the engine switch on (IG).

Read and record any DTCs from the tire pressure warning light on the combination meter assembly. Refer to the illustration for examples of a normal system code and codes 13 and 33.

  • HINT:
If the tire pressure warning light does not indicate any DTCs or the normal system code, inspect the tire pressure warning light circuit or TC and CG terminal circuit.
Trouble AreaSee page
Tire pressure warning light circuit
TC and CG terminal circuit
If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is displayed first.
Text in Illustration
*1DLC3
*2Tire Pressure Warning Light
*aNormal System Code
*bON
*cOFF
*d0.25 sec.
*eCode 13 and 33
*f0.5 sec.
*g2.5 sec.
*h1.5 sec.
*i4.5 sec.
*jRepeat

Refer to the Diagnostic Trouble Code Chart () for DTC information.

After completing the check, turn the engine switch off and remove SST from the DLC3.

CLEAR DTC
  • HINT:
  • After repairing the malfunctions, clear the DTCs.

Turn the engine switch off.

Connect the GTS to the DLC3.

Turn the engine switch on (IG).

Turn the GTS on.

Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.

Clear DTCs following the prompts on the GTS screen.

  • HINT:
  • Refer to the GTS operator's manual for further details.