Датчик Отстойника Топлива -- Снятие |
1. REMOVE NO. 1 ENGINE COVER |
Detach the 4 clips and remove the engine cover.
![]() |
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY |
Disconnect the mass air flow meter connector.
![]() |
Disconnect the No. 2 ventilation hose.
Disconnect the 2 clamps and band, and remove the air cleaner cap sub-assembly.
Remove the air cleaner filter element.
3. REMOVE AIR CLEANER CASE SUB-ASSEMBLY |
Remove the 3 bolts and air cleaner case.
![]() |
4. REMOVE FUEL FILTER ASSEMBLY |
Disconnect the 4 fuel hoses. (without combustion type power heater)
Disconnect the No. 3 fuel hose (*1).
Disconnect the No. 2 fuel hose (*2).
Disconnect the No. 1 fuel hose (*3).
Disconnect the No. 4 fuel hose (*4).
Disconnect the 5 fuel hoses. (with combustion type power heater)
Disconnect the No. 3 fuel hose (*1).
Disconnect the No. 2 fuel hose (*2).
Disconnect the No. 1 fuel hose (*3).
Disconnect the No. 4 fuel hose (*4).
Disconnect the heater fuel hose (*5).
Remove the fuel filter assembly.
Disconnect the level warning switch connector.
Remove the 2 nuts and fuel filter assembly.
5. DRAIN FUEL |
Loosen the drain bolt, and drain the fuel from the fuel filter.
![]() |
6. REMOVE FUEL FILTER GASKET |
Disconnect the level warning switch connector and harness clamp from the fuel filter cap.
![]() |
Remove the bolt and then remove the filter stay and filter gasket.
![]() |
7. REMOVE LEVEL WARNING SWITCH |
Clamp the fuel filter assembly in a vise.
- ПРИМЕЧАНИЕ:
- Be careful not to damage the fuel filter cap.
![]() |
Using pliers, remove the level warning switch.
- ПРИМЕЧАНИЕ:
- Be careful not to damage the level warning switch.
Remove the O-ring from the level warning switch.