ACTIVE HEIGHT CONTROL PUMP AND MOTOR - REASSEMBLY

1. INSTALL NO. 1 HEIGHT CONTROL BOLT CUSHION

Install the 3 bolt cushions and 3 bolt holders to the pump and motor.

2. INSTALL HEIGHT CONTROL RESERVOIR ASSEMBLY

Using a 5 mm hexagon wrench, install the reservoir with the 5 bolts.

3. INSTALL HEIGHT CONTROL COMPRESSOR BRACKET ASSEMBLY

Install the bracket with the 3 nuts.

4. CONNECT NO. 4 FRAME WIRE

Connect the 2 connectors, clamp and frame wire.

5. INSTALL HEIGHT CONTROL CAP TO RESERVOIR HOSE

Install the hose to the reservoir tank, and push the connector up to attach it.

Install the hose, 2 breather plugs and 3 clips to the reservoir hose.

6. INSTALL HEIGHT CONTROL HOSE ASSEMBLY

Install the hose to the reservoir and motor with the 2 clips.

Connect the clamp to the reservoir.

Check that the direction of the hose clamp is as shown in the illustration.

Active Height Control Pump And Motor - Reassembly