INSPECT TRANSMISSION CONTROL SWITCH

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  3 (IG) - 7 (S)	Shift lever in S, "+" or "-"	Below 1 Ω
  2 (SFTU) - 5 (E)	Shift lever held in "+" (Up-shift)
  1 (SFTD) - 5 (E)	Shift lever held in "-" (Down-shift)
  3 (IG) - 7 (S)	Shift lever not in S, "+" or "-"	10 kΩ or higher
  2 (SFTU) - 5 (E)	Shift lever in S
  1 (SFTD) - 5 (E)

If the result is not as specified, replace the transmission floor shift assembly.