Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - A750F AUTOMATIC TRANSMISSION / TRANSAXLE
VALVE BODY ASSEMBLY - INSTALLATION
| 1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY |
Install the spring and check ball body.
Insert the pin of the manual valve into the hole of the manual valve lever.
Install the transmission valve body with the 19 bolts.
- Torque:
- 11 N*m{ 112 kgf*cm, 8 ft.*lbf}
- HINT:
- Each bolt length is indicated below.
36 mm (1.42 in.) for bolt A
25 mm (0.984 in.) for bolt B
Install the detent spring and detent spring cover with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
| 2. CONNECT TRANSMISSION WIRE |
Connect the 7 connectors to the solenoid valves.
Connect the 2 ATF temperature sensors with the 2 clamps and 2 bolts.
- Torque:
- for bolt A:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
- for bolt B:
- 11 N*m{ 112 kgf*cm, 8 ft.*lbf}
- HINT:
- Each bolt length is indicated below.
- 12 mm (0.472 in.) for bolt A
36 mm (1.42 in.) for bolt B
| 3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY |
Coat a new O-ring with ATF and install it to the oil strainer.
Install the oil strainer with the 4 bolts.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
| 4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY |
- NOTICE:
- Remove the gasket and be careful not to spill oil on the contacting surfaces of the transmission case and oil pan.
Install a new gasket and the oil pan with the 20 bolts.
- Torque:
- 4.4 N*m{ 45 kgf*cm, 39 in.*lbf}
| 5. RESET MEMORY |
()
| 6. ADD AUTOMATIC TRANSMISSION FLUID |
Add automatic transmission fluid ().