Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - A750F AUTOMATIC TRANSMISSION / TRANSAXLE
TRANSMISSION WIRE - INSTALLATION
| 1. INSTALL TRANSMISSION WIRE |
Coat the O-ring of the transmission wire connector with ATF.
Install the transmission wire with the bolt.
- Torque:
- 5.4 N*m{ 55 kgf*cm, 48 in.*lbf}
Connect the transmission wire connector.
- HINT:
- Push up the lever until the claw of the transmission wire connector makes a connection sound.
| 2. CONNECT TRANSMISSION WIRE |
Connect the 7 connectors to the solenoid valves.
Connect the 2 ATF temperature sensors with the 2 clamps and 2 bolts.
- Torque:
- for bolt A:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
- for bolt B:
- 11 N*m{ 112 kgf*cm, 8 ft.*lbf}
- HINT:
- Each bolt length is indicated below.
- 12 mm (0.472 in.) for bolt A
36 mm (1.42 in.) for bolt B
| 3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY |
Coat a new O-ring with ATF and install it to the oil strainer.
Install the oil strainer with the 4 bolts.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
| 4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY |
- NOTICE:
- Remove the gasket and be careful not to spill oil on the contacting surfaces of the transmission case and oil pan.
Install a new gasket and the oil pan with the 20 bolts.
- Torque:
- 4.4 N*m{ 45 kgf*cm, 39 in.*lbf}
| 5. ADD AUTOMATIC TRANSMISSION FLUID |
Add automatic transmission fluid ().