Network Gateway Ecu Removal

Body Electrical. Lexus Is250, Is220D. Gse20 Ale20
Audio Visual. Lexus Is250, Is220D. Gse20 Ale20

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT DOOR SCUFF PLATE (w/o Illumination)

  3. REMOVE FRONT DOOR SCUFF PLATE (w/ Illumination)

  4. REMOVE FRONT DOOR OPENING TRIM COVER

  5. REMOVE SIDE INSTRUMENT PANEL

  6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

  7. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (for LHD)

  8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

  9. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

  10. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for RHD)

  11. REMOVE NETWORK GATEWAY ECU

Network Gateway Ecu -- Removal


NOTICE:
When disassembling the network gateway ECU, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (Click here).


2. REMOVE FRONT DOOR SCUFF PLATE (w/o Illumination)
HINT:
Removal procedure of the RH side is the same as that of the LH side (Click here).


3. REMOVE FRONT DOOR SCUFF PLATE (w/ Illumination)
HINT:
Removal procedure of the RH side is the same as that of the LH side (Click here).


4. REMOVE FRONT DOOR OPENING TRIM COVER


    Lexus Is250, Is220D. Gse20 Ale20

  1. Disengage the 6 claws and remove the front door opening trim cover RH.



5. REMOVE SIDE INSTRUMENT PANEL


    Lexus Is250, Is220D. Gse20 Ale20

  1. Using a moulding remover, disengage the 5 claws and 3 clips, and then remove the side instrument panel RH.



6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    Lexus Is250, Is220D. Gse20 Ale20

  1. Using a moulding remover, disengage the 4 clips and remove the No. 2 instrument panel under cover sub-assembly.



7. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (for LHD)


8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)


    Lexus Is250, Is220D. Gse20 Ale20

  1. Remove the 5 screws <E>.

  1. Disengage the 2 claws.

  1. Disconnect the connectors and remove the glove compartment door assembly.



9. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    Lexus Is250, Is220D. Gse20 Ale20.Audio Visual.Audio And Visual System.Network Gateway Ecu Removal

  1. Remove the 2 screws <E>.

  1. Push the 2 claws in the direction indicated by the arrow to disengage them.

  1. Remove the No. 1 instrument panel under cover sub-assembly from the guide as shown in the illustration and pull the cover toward the rear of the vehicle.

  1. Disconnect the connectors and remove the No. 1 instrument panel under cover sub-assembly.



10. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for RHD)


    Lexus Is250, Is220D. Gse20 Ale20

  1. Disengage the 7 clips.

  1. Disconnect the connectors and remove the lower instrument panel finish panel sub-assembly.



11. REMOVE NETWORK GATEWAY ECU

  1. Disconnect the connector.



    Lexus Is250, Is220D. Gse20 Ale20

  1. Disengage the 2 claws and remove the cover.



    Lexus Is250, Is220D. Gse20 Ale20

  1. Remove the network gateway ECU.