Multiplex Tilt And Telescopic Ecu Installation

Steering. Lexus Is250, Is220D. Gse20 Ale20
Steering Column. Lexus Is250, Is220D. Gse20 Ale20

  1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

  2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY

  3. INSTALL STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic)

Multiplex Tilt And Telescopic Ecu -- Installation



1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU


    Lexus Is250, Is220D. Gse20 Ale20

  1. Install the multiplex tilt and telescopic ECU with the 2 screws.

    Torque:
    1.5 N*m{15 kgf*cm, 13 in.*lbf}

  1. Connect the connector to the multiplex tilt and telescopic ECU.

    NOTICE:
    1. The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape.
    2. When installing them, connect the connectors of the same color.


2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY

  1. Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.



    Lexus Is250, Is220D. Gse20 Ale20

  1. Tighten the 2 tapered-head bolts until the bolt heads break off.



3. INSTALL STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic)
HINT:
Refer to the instructions for Installation of the steering column assembly (for Power Tilt and Power Telescopic) (Click here).