Skid Control Buzzer Installation

Brake. Lexus Is250, Is220D. Gse20 Ale20
Brake Control. Lexus Is250, Is220D. Gse20 Ale20

  1. INSTALL SKID CONTROL BUZZER ASSEMBLY

  2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY

  3. INSTALL LOWER INSTRUMENT FINISH PANEL SUB-ASSEMBLY

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  5. INSTALL SIDE INSTRUMENT PANEL LH

  6. CONNECT BATTERY NEGATIVE TERMINAL

  7. INSPECT SRS WARNING LIGHT

  8. PERFORM INITIALIZATION

Skid Control Buzzer -- Installation



1. INSTALL SKID CONTROL BUZZER ASSEMBLY


    Lexus Is250, Is220D. Gse20 Ale20

  1. Attach the claw and install the skid control buzzer assembly.

  1. Connect the skid control buzzer assembly connector.



2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY


    Lexus Is250, Is220D. Gse20 Ale20

  1. Connect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Install the driver side knee airbag assembly with the 4 bolts.

    Torque:
    10 N*m{102 kgf*cm, 7 ft.*lbf}


3. INSTALL LOWER INSTRUMENT FINISH PANEL SUB-ASSEMBLY


    Lexus Is250, Is220D. Gse20 Ale20

  1. Connect the connectors.

  1. Engage the 7 clips and install the lower instrument panel finish panel sub-assembly.



4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    Lexus Is250, Is220D. Gse20 Ale20.Brake Control.Vehicle Stability Control System (W/ Vdim).Skid Control Buzzer Installation

  1. Connect the connectors.

  1. Insert the No. 1 instrument panel under cover sub-assembly into the guide as shown in the illustration.

  1. Engage the 2 claws.

  1. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <E>.



5. INSTALL SIDE INSTRUMENT PANEL LH


    Lexus Is250, Is220D. Gse20 Ale20

  1. Engage the 5 claws and 3 clips, and then install the side instrument panel LH.



6. CONNECT BATTERY NEGATIVE TERMINAL
Torque:
5.4 N*m{55 kgf*cm, 48 in.*lbf}


7. INSPECT SRS WARNING LIGHT
HINT:
(Click here).


8. PERFORM INITIALIZATION
HINT:
(Click here).
Some system need initialization after reconnecting the cable to the negative battery cable.