Entry And Start System Data List / Active Test

Engine. Lexus Is250, Is220D. Gse20 Ale20
4Gr-Fse Starting. Lexus Is250, Is220D. Gse20 Ale20

  1. READ DATA LIST

  1. PERFORM ACTIVE TEST

Entry And Start System -- Data List / Active Test



READ DATA LIST
HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful as intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Read the DATA LIST.

    Power Source Control:
    Item
    		Measurement Item / Display (Range)
    		Normal Condition
    		Diagnostic Note
    Shift P Sig
    		Shift P switch / ON or OFF
    		ON: Shift P position
    OFF: Shift non-P position
    		-
    Str Unlock SW
    		Steering lock condition / ON or OFF
    		ON: Steering is unlocked
    OFF: Steering is locked
    		-
    Stop Lamp SW1
    		Stop light switch 1 / ON or OFF
    		ON: Brake pedal depressed
    OFF: Brake pedal released
    		-
    St SW1
    		Start switch 1 / ON or OFF
    		ON: Engine switch is pushed
    OFF: Engine switch is not pushed
    		-
    St SW2
    		Start switch 2 / ON or OFF
    		ON: Engine switch is pushed
    OFF: Engine switch is not pushed
    		-
    N SW / C SW
    		Neutral start switch (A/T) clutch start switch (M/T) / ON or OFF
    		ON: Shift position is P or N (A/T) clutch pedal depressed (M/T)
    OFF: Shift position is neither P nor N (A/T) clutch pedal released (M/T)
    		-
    Ratch Circuit
    		Ratch circuit / ON or OFF
    		ON: Engine switch on (IG) or engine running
    OFF: Engine switch off, on (ACC)
    		-
    IG1 Relay Mon1
    		IG1 outer relay monitor / ON or OFF
    		ON: Engine switch on (IG)
    OFF: Engine switch off
    		-
    IG1 Relay Mon2
    		IG1 inner relay monitor / ON or OFF
    		ON: Engine switch on (IG)
    OFF: Engine switch off
    		-
    IG2 Relay Mon1
    		IG2 outer relay monitor / ON or OFF
    		ON: Engine switch on (IG)
    OFF: Engine switch off
    		-
    IG2 Relay Mon2
    		IG2 inner relay monitor / ON or OFF
    		ON: Engine switch on (IG)
    OFF: Engine switch off
    		-
    St Relay Mon
    		STARTER relay monitor / ON or OFF
    		ON: Engine is cranking
    OFF: Engine is not cranking
    		Engine is cranking with engine switch on (IG) and shift lever in P or N (A/T) or clutch pedal depressed (M/T)
    St Request Sig
    		Starter request signal monitor / ON or OFF
    		ON: ST relay is ON
    OFF: ST relay is OFF
    		Engine switch pressed and held with shift lever in P or N (A/T) or with clutch pedal depressed (M/T)
    ACC Relay Mon
    		ACC relay monitor / ON or OFF
    		ON: Engine switch on (ACC)
    OFF: Engine switch off
    		-
    ACC Cut Sig
    		ACC relay cut signal / ON or OFF
    		ON: Engine is cranking
    OFF: Engine is not cranking
    		-
    E/G Cond
    		Engine condition / STOP or RUN
    		STOP: Engine is stopped
    RUN: Engine is running
    		-
    Vehicle Spd Sig
    		Vehicle speed signal / STOP or RUN
    		STOP: Vehicle is stopped
    RUN: Vehicle is running
    		-
    Shift P Signal Pulse
    		Shift P position signal (A/T) / NORMAL1, NORMAL2, NORMAL3, ERROR1, ERROR2, ERROR3, UNKNOWN
    		NORMAL1: Normal condition and shift position is condition unknown
    NORMAL2: Normal condition and shift position is P
    NORMAL3: Normal condition and shift position is not P
    ERROR1: Malfunction condition and shift position is condition unknown
    ERROR2: Malfunction condition and shift position is P
    ERROR3: Malfunction condition and shift position is not P
    UNKNOWN: Condition unknown
    		-
    Pwr Cond
    		Power supply condition / ALL, ACC ON, IG1 IG2, ST ON
    		ALL: All relays are OFF
    ACC ON: ACC relay is ON
    IG1: IG1 relay is ON
    IG2: IG2 relay is ON
    ST ON: ST request signal is ON
    		-
    #Code
    		Number of diagnostic codes / Min.: 0, Max.: 255
    		-
    		-


PERFORM ACTIVE TEST
HINT:
Performing the intelligent tester's ACTIVE TEST allows the relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Perform the ACTIVE TEST according to the display on the tester.


Power Source Control:
Item
Test Details
Diagnostic Note
Lighting Ind
Indicator for lighting ON / OFF
-
Ind Condition
Indicator Green / Amber / No Sig
-
S Lock Pwr
Power supply for steering lock ECU ON / OFF
-