Can Communication System Can Main Bus Line For Disconnection (Lhd Models)

Communication System. Lexus Gs430, Gs300. Uzs190 Grs190
Can Communication. Lexus Gs430, Gs300. Uzs190 Grs190

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK DLC3

CHECK CAN MAIN BUS LINE OR CONNECTOR

CONNECT CONNECTOR

CHECK CAN MAIN BUS LINE OR CONNECTOR (P-CAN JUNCTION CONNECTOR)

CAN COMMUNICATION SYSTEM - CAN Main Bus Line for Disconnection (LHD Models)


DESCRIPTION

There may be an open circuit in the CAN main bus line and/or the DLC3 sub bus line when the resistance between terminals 6 (CANH) and 14 (CANL) of the DLC3 is 69 Ω or more.

Symptom
Trouble Area
Resistance between terminals 6 (CANH) and 14 (CANL) of the DLC3 is 69 Ω or more.
  1. CAN main bus line or connector
  2. Junction connector (P-CAN J/C)
  3. Junction connector (D-CAN J/C)
  4. DLC3 sub bus line or connector

WIRING DIAGRAM


Lexus Gs430, Gs300. Uzs190 Grs190.Can Communication.Can Communication System.Can Communication System Can Main Bus Line For Disconnection (Lhd Models)


INSPECTION PROCEDURE

1.CHECK DLC3

  1. Turn the Engine switch off.



    Lexus Gs430, Gs300. Uzs190 Grs190.Can Communication.Can Communication System.Can Communication System Can Main Bus Line For Disconnection (Lhd Models)

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester connection
    		Condition
    		Specified value
    		Result
    L16-6 (CANH) - L16-14 (CANL)
    		Engine Switch OFF
    		108 to 132 Ω
    		A
    L16-6 (CANH) - L16-14 (CANL)
    		Engine Switch OFF
    		132 Ω or more
    		B
HINT:
When the measured value is 132 Ω or more and a CAN communication system diagnostic trouble code is output, there may be a fault besides disconnection of the DLC3 sub bus line. For that reason, troubleshooting should be performed again from "HOW TO PROCEED WITH TROUBLESHOOTING" (Click here) after repairing the trouble area.


B
REPAIR OR REPLACE DLC3 SUB BUS LINE OR CONNECTOR
A


2.CHECK CAN MAIN BUS LINE OR CONNECTOR

  1. Disconnect the CAN main bus line connector (L4) from the D-CAN J/C A side (w/ earth terminal).

    HINT:
    1. Before disconnecting the connector, make a note of where it is connected.
    2. Reconnect the connector to its original position.


    Lexus Gs430, Gs300. Uzs190 Grs190.Can Communication.Can Communication System.Can Communication System Can Main Bus Line For Disconnection (Lhd Models)

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    		Condition
    		Specified Value
    L4-1 (CANH) - L4-2 (CANL)
    		Engine switch off
    		108 to 132 Ω


OK
REPLACE JUNCTION CONNECTOR (D-CAN JUNCTION CONNECTOR)
NG


3.CONNECT CONNECTOR

  1. Reconnect the CAN main bus line connector (L4) to the D-CAN J/C A side (w/ earth terminal).


NEXT


4.CHECK CAN MAIN BUS LINE OR CONNECTOR (P-CAN JUNCTION CONNECTOR)


    Lexus Gs430, Gs300. Uzs190 Grs190.Can Communication.Can Communication System.Can Communication System Can Main Bus Line For Disconnection (Lhd Models)

  1. Disconnect the CAN main bus line connector (L78) from the P-CAN J/C B side (w/o earth terminal).

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    		Condition
    		Specified Value
    L78-1 (CANH) - L78-2 (CANL)
    		Engine switch off
    		108 to 132 Ω


NG
REPAIR OR REPLACE CAN MAIN BUS LINE OR CONNECTOR (CAN-H,CAN-L)
OK

REPLACE JUNCTION CONNECTOR (P-CAN JUNCTION CONNECTOR)