Parking Assist Monitor System -- Precaution |
- NOTICE:
- When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.
System Name | See procedure |
Power Window Control System | Click here |
Sliding Roof System | |
Clearance Sonar System | |
Parking Assist Monitor System | |
Variable Gear Ratio Steering System |
1.POINTS TO NOTICE WHEN SERVICING |
The maximum steering angle setting must be carried out with the engine on. Apply the parking brake, depress the brake pedal, move the shift lever to the P position, and ensure that the vehicle is not moving.
Pay attention to the following points when servicing:
When disconnecting the cable from the negative (-) battery terminal, "SYSTEM INITIALIZING" appears on the screen. In this case, correct the steering angle neutral point (Click here).
When replacing the television camera ECU, "SYSTEM NOT READY" appears on the screen. In this case, set the maximum steering angle and steering angle neutral point, and adjust the line display position. In addition, when the television camera is replaced or its installation angle needs to be adjusted, readjustment of the line display position is required (Click here).