Stereo Component Speaker Removal
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE REAR SEAT CUSHION ASSEMBLY
REMOVE REAR SEAT HEADREST ASSEMBLY LH AND RH
REMOVE REAR SEAT HEADREST ASSEMBLY CENTER
REMOVE REAR SEATBACK ASSEMBLY
REMOVE REAR SEAT OUTER BELT ASSEMBLY
REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
REMOVE REAR DOOR SCUFF PLATE LH
REMOVE REAR DOOR SCUFF PLATE RH
REMOVE REAR SEAT SIDE GARNISH LH
REMOVE REAR SEAT SIDE GARNISH RH
REMOVE ROOF SIDE GARNISH INNER LH
REMOVE ROOF SIDE GARNISH INNER RH
REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY
REMOVE AUTOMATIC LIGHT CONTROL SENSOR
REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)
REMOVE STEREO COMPONENT SPEAKER ASSEMBLY
Stereo Component Speaker -- Removal |
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE REAR SEAT CUSHION ASSEMBLY |
Detach the seat cushion's 2 front hooks from the vehicle body.
- NOTICE:
- Follow the instructions below carefully as the cushion frame deforms easily.
Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
Repeat for the other hook.
Detach the seat cushion's 2 rear hooks from the seatback.
Remove the seat cushion.
3. REMOVE REAR SEAT HEADREST ASSEMBLY LH AND RH |
4. REMOVE REAR SEAT HEADREST ASSEMBLY CENTER |
5. REMOVE REAR SEATBACK ASSEMBLY |
Using a screwdriver, detach the claws and remove the 2 rear seat covers.
- HINT:
- Tape the screwdriver tip before use.
Using a screwdriver, detach the claw to open the cap of the 3 rear seat shoulder belt guides.
Remove the bolt and floor anchor part.
Remove the 4 bolts and 2 nuts.
Remove the seatback.
6. REMOVE REAR SEAT OUTER BELT ASSEMBLY |
Remove the bolt and anchor part of the rear seat outer belt assembly.
7. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH |
Disconnect the connector labeled A.
Remove the bolt and the anchor part of the rear seat inner with center belt assembly RH labeled B.
8. REMOVE REAR DOOR SCUFF PLATE LH |
Using a moulding remover, detach the 5 claws and remove the scuff plate.
9. REMOVE REAR DOOR SCUFF PLATE RH |
- HINT:
- Use the same procedures described for the LH side.
10. REMOVE REAR SEAT SIDE GARNISH LH |
Using a moulding remover, pull the garnish in the direction indicated by the arrow in the illustration to detach the 5 claws. Then remove the garnish.
11. REMOVE REAR SEAT SIDE GARNISH RH |
- HINT:
- Use the same procedures described for the LH side.
12. REMOVE ROOF SIDE GARNISH INNER LH |
Detach the 4 clips.
Pull the garnish in the direction indicated by the arrow in the illustration to detach the 2 claws. Then remove the garnish.
13. REMOVE ROOF SIDE GARNISH INNER RH |
- HINT:
- Use the same procedures described for the LH side.
14. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY |
Remove the high mounted stop light.
15. REMOVE AUTOMATIC LIGHT CONTROL SENSOR |
Disconnect the connector and remove the sensor.
16. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY |
Remove the bolt and anchor of the rear seat outer belt.
Disconnect the connector labeled A.
Remove the bolt labeled B and seat belt.
Using a moulding remover, detach the 4 claws and remove the belt guide LH.
- HINT:
- Use the same procedure described for the RH side.
Using a moulding remover, detach the 4 claws and remove the belt guide center.
Detach the clip and remove the panel.
17. REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) |
Detach the 5 claws and 3 clips.
Disconnect the connector and remove the panel.
18. REMOVE STEREO COMPONENT SPEAKER ASSEMBLY |
Disconnect the connector.
Remove the 4 bolts and speaker.
- HINT:
- Do not touch the cone part of the speaker.