Restraints. Lexus Gs430, Gs300. Uzs190 Grs190
Supplemental Restraint System. Lexus Gs430, Gs300. Uzs190 Grs190
Front Airbag Sensor -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
| 2. REMOVE COOL AIR INTAKE DUCT SEAL |
 |
Using a clip remover, remove the 7 clips and duct seal.
| 3. REMOVE FRONT BUMPER COVER |
Using a clip remover, remove the 2 clips.
- HINT:
- Put protective tape under the front fender.
Remove the 6 screws and 5 bolts.
 |
Pull the bumper cover to detach the 3 claws on the LH side.
 |
Pull the bumper cover to detach the 3 claws on the RH side and remove the bumper cover.
w/ Clearance sonar system:
Disconnect the ultrasonic sensor connector.
| 4. REMOVE HEADLIGHT ASSEMBLY |
 |
Disconnect the connector as shown in the illustration.
Remove the 3 bolts.
 |
w/ Headlight cleaner:
Disconnect the headlight cleaner hose.
Detach the claw and remove the headlight.
| 5. REMOVE FRONT AIRBAG SENSOR |
Remove the 2 bolts and front airbag sensor from the body.
 |
Disconnect the connector.