Dtc B2001 Short To Gnd In Seat Belt Motor Rh Circuit

Restraints. Lexus Gs430, Gs300. Uzs190 Grs190
Pre-Crash Safety. Lexus Gs430, Gs300. Uzs190 Grs190

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK WIRE HARNESS (FRONT SEAT OUTER BELT ASSEMBLY RH - SEAT BELT CONTROL ECU)

INSPECT FRONT SEAT OUTER BELT ASSEMBLY RH

DTC B2001 Short to GND in Seat Belt Motor RH Circuit


DESCRIPTION

The seat belt control ECU receives information from the seat belt control ECU (distance control ECU) through CAN communication and tightens the seat belt by operating the motor in the front seat outer belt assembly RH.

CAUTION:
The pretensioner is built into the front seat outer belt assembly RH. Be sure to follow the correct inspection procedure, as failure to follow the correct procedure (such as inspection of incorrect connectors) may activate the pretensioner.

DTC No.
DTC Detection Condition
Trouble Area
B2001
  1. Short to ground in seat belt motor RH circuit continues for 1 second or more
  2. Short in seat belt motor RH circuit
  1. Front seat outer belt assembly RH
  2. Wire harness (seat belt control ECU - front seat outer belt assembly RH)
  3. Seat belt control ECU

WIRING DIAGRAM

Reter to the DTC B2000 (Click here).

INSPECTION PROCEDURE

NOTICE:
When the seat belt control ECU is replaced with a new one, Active Test must be performed (Click here).
1.CHECK WIRE HARNESS (FRONT SEAT OUTER BELT ASSEMBLY RH - SEAT BELT CONTROL ECU)


    Lexus Gs430, Gs300. Uzs190 Grs190.Pre-Crash Safety.Pre-Crash Safety System. Dtc B2001 Short To Gnd In Seat Belt Motor Rh Circuit

  1. Turn the engine switch off.

  1. Disconnect the cable from the negative (-) battery terminal.

  1. Disconnect the V8 belt connector.

  1. Measure the resistance of the wire harness side connector.

    Standard resistance:
    Tester Connection
    		Condition
    		Specified Condition
    V8-1 - Body ground
    		Always
    		1 MΩ or higher
    V8-2 - Body ground
    		Always
    		1 MΩ or higher
    V8-1 - V8-2
    		Always
    		1 MΩ or higher


NG
REPAIR OR REPLACE HARNESS AND CONNECTOR
OK


2.INSPECT FRONT SEAT OUTER BELT ASSEMBLY RH


    Lexus Gs430, Gs300. Uzs190 Grs190.Pre-Crash Safety.Pre-Crash Safety System. Dtc B2001 Short To Gnd In Seat Belt Motor Rh Circuit

  1. Measure the resistance of the connector.

    Standard resistance:
    Tester Connection
    		Condition
    		Specified Condition
    V8-1 - Body ground
    		Always
    		1 MΩ or higher
    V8-2 - Body ground
    		Always
    		1 MΩ or higher


NG
REPLACE FRONT SEAT OUTER BELT ASSEMBLY RH
OK

REPLACE SEAT BELT CONTROL ECU