Suspension & Axle. Lexus Gs430, Gs300. Uzs190 Grs190
Tire And Wheel. Lexus Gs430, Gs300. Uzs190 Grs190
Tire Pressure Warning System -- Data List / Active Test |
DATA LIST |
Connect the intelligent tester to DLC3.
Turn the engine switch on (IG).
Following the display on the intelligent tester, read the "DATA LIST".
Item | Measurement item/ Range (Display) | Normal Condition | Diagnostic Note |
Mode | Tire pressure warning system mode/NORMAL or REG 2nd or REG M or TEST | NORMAL: Normal mode TEST: Test mode | - |
Main | Number of main tire ID to be registered/ 0 or 1 or 2 or 3 or 4 | 0 to 4 should be displayed | - |
2nd | Number of 2nd tire ID to be registered/ 0 or 1 or 2 or 3 or 4 | 0 to 4 should be displayed | - |
Slct SW | Select Switch Status | No pressing: MAIN Pressing: 2nd | - |
Ini SW | Initialization switch/ON, OFF | ON: Switch on OFF: Switch off | - |
Vhcl Spd | Vehicle speed reading/ min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) | Actual vehicle speed | Speed indicated on the combination meter |
Trans Stat | ID code transmission place/ MAIN or 2nd | MAIN or 2nd | - |
ID1 Cod | Registered ID1 code/min.: 0, max.: FFFFFFF | The ID No. registered in the transmitter ID1 is displayed | - |
ID2 Cod | Registered ID2 code/min.: 0, max.: FFFFFFF | The ID No. registered in the transmitter ID2 is displayed | - |
ID3 Cod | Registered ID3 code/min.: 0, max.: FFFFFFF | The ID No. registered in the transmitter ID3 is displayed | - |
ID4 Cod | Registered ID4 code/min.: 0, max.: FFFFFFF | The ID No. registered in the transmitter ID4 is displayed | - |
Trans Stat | ID code transmission status/ FINISH or NOW | FINISH or NOW | - |
Press1 | ID1 tire inflation pressure/ min.: 0 kPa (0 kgf*cm2, 0 psi), max.: 637.5 kPa (6.48 kgf*cm2,92.2 psi) | Actual tire inflation pressure | - |
Press2 | ID2 tire inflation pressure/ min.: 0 kPa (0 kgf*cm2, 0 psi), max.: 637.5 kPa (6.48 kgf*cm2,92.2 psi) | Actual tire inflation pressure | - |
Press3 | ID3 tire inflation pressure/ min.: 0 kPa (0 kgf*cm2, 0 psi), max.: 637.5 kPa (6.48 kgf*cm2,92.2 psi) | Actual tire inflation pressure | - |
Press4 | ID4 tire inflation pressure/ min.: 0 kPa (0 kgf*cm2, 0 psi), max.: 637.5 kPa (6.48 kgf*cm2,92.2 psi) | Actual tire inflation pressure | - |
Temp1 | ID1 temperature in tire/ min.: -40°C (-40°F), max.: 215°C (419°F) | Actual tire temperature | - |
Temp2 | ID2 temperature in tire/ min.: -40°C (-40°F), max.: 215°C (419°F) | Actual tire temperature | - |
Temp3 | ID2 temperature in tire/ min.: -40°C (-40°F), max.: 215°C (419°F) | Actual tire temperature | - |
Temp4 | ID2 temperature in tire/ min.: -40°C (-40°F), max.: 215°C (419°F) | Actual tire temperature | - |
Volt1 | ID1 battery voltage/ OVER or LESS | OVER | - |
Volt2 | ID2 battery voltage/ OVER or LESS | OVER | - |
Volt3 | ID3 battery voltage/ OVER or LESS | OVER | - |
Volt4 | ID4 battery voltage/ OVER or LESS | OVER | - |
Slct Info | Select switch setting information/ WITH or WITHOUT | WITH or WITHOUT | - |
Ini Info | Initialization switch setting information/ WITH or WITHOUT | WITH or WITHOUT | - |
Ini Thre1 | ID1 initial threshold of low-pressure/ min.: 0 kPa (0 kgf*cm2, 0 psi), max.: 637.5 kpa (6.48 kgf*cm2, 92.2 psi) | Tire pressure after initialization | - |
Ini THre2 | ID2 initial threshold of low-pressure/ min.: 0 kpa (0 kgf*cm2, 0 psi), max.: 637.5 kpa (6.48 kgf*cm2, 92.2 psi) | Tire pressure after initialization | - |
Ini Thre3 | ID3 initial threshold of low-pressure/ min.: 0 kpa (0 kgf*cm2, 0 psi), max.: 637.5 kpa (6.48 kgf*cm2, 92.2 psi) | Tire pressure after initialization | - |
Ini Thre4 | ID4 initial threshold of low-pressure/ min.: 0 kpa (0 kgf*cm2, 0 psi), max.: 637.5 kpa (6.48 kgf*cm2, 92.2 psi) | Tire pressure after initialization | - |
# Codes | Number of DTC recorded/ min.: 0, max.: 255 | Min.: 0, Max.: - | - |