Rear Differential Carrier Assembly (For 3Uz-Fe) Removal

Drive Line. Lexus Gs430, Gs300. Uzs190 Grs190
Differential. Lexus Gs430, Gs300. Uzs190 Grs190

  1. REMOVE REAR WHEEL

  2. DRAIN DIFFERENTIAL OIL

  3. REMOVE EXHAUST PIPE ASSEMBLY

  4. REMOVE REAR PROPELLER SHAFT ASSEMBLY

  5. SEPARATE REAR SHOCK ABSORBER WITH COIL SPRING LH

  6. SEPARATE REAR SHOCK ABSORBER WITH COIL SPRING RH

  7. REMOVE REAR FLOOR SIDE MEMBER COVER LH

  8. REMOVE REAR FLOOR SIDE MEMBER COVER RH

  9. REMOVE REAR AXLE ASSEMBLY LH

  10. REMOVE REAR AXLE ASSEMBLY RH

  11. REMOVE DIFFERENTIAL SUPPORT PROTECTOR NO.2

  12. REMOVE DIFFERENTIAL SUPPORT PROTECTOR NO.1

  13. REMOVE REAR SUSPENSION MEMBER BRACE LH

  14. REMOVE REAR SUSPENSION MEMBER BRACE RH

  15. SEPARATE PARKING BRAKE CABLE ASSEMBLY NO.3

  16. SEPARATE PARKING BRAKE CABLE ASSEMBLY NO.2

  17. REMOVE REAR DRIVE SHAFT ASSEMBLY LH

  18. REMOVE REAR DRIVE SHAFT ASSEMBLY RH

  19. DISCONNECT HEIGHT CONTROL SENSOR REAR LH

  20. REMOVE REAR SUSPENSION MEMBER BRACE REAR LOWER LH

  21. REMOVE REAR SUSPENSION MEMBER BRACE REAR LOWER RH

  22. REMOVE REAR SUSPENSION MEMBER ASSEMBLY

  23. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

Rear Differential Carrier Assembly (For 3Uz-Fe) -- Removal



1. REMOVE REAR WHEEL


2. DRAIN DIFFERENTIAL OIL

  1. Using a hexagon wrench (10 mm), remove the differential filler plug and gasket.

  1. Using a hexagon wrench (10 mm), remove the differential drain plug and gasket, and drain the oil.



3. REMOVE EXHAUST PIPE ASSEMBLY
(Click here)


4. REMOVE REAR PROPELLER SHAFT ASSEMBLY
(Click here)


5. SEPARATE REAR SHOCK ABSORBER WITH COIL SPRING LH


    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Remove the bolt and nut, and separate the rear stabilizer link assembly and the load sensing valve sensor bracket from the rear No.2 suspension arm.

  1. Remove the bolt and nut, and separate the rear shock absorber with coil spring from the rear No.2 suspension arm assembly



6. SEPARATE REAR SHOCK ABSORBER WITH COIL SPRING RH
HINT:
Removal procedure of the RH side is the same as that of the LH side.


7. REMOVE REAR FLOOR SIDE MEMBER COVER LH


    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Remove the 3 screws and side member cover LH.



8. REMOVE REAR FLOOR SIDE MEMBER COVER RH
HINT:
Removal procedure of the RH side is the same as that of the LH side.


9. REMOVE REAR AXLE ASSEMBLY LH
(Click here)


10. REMOVE REAR AXLE ASSEMBLY RH
HINT:
Removal procedure of the RH side is the same as that of the LH side.


11. REMOVE DIFFERENTIAL SUPPORT PROTECTOR NO.2


    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Remove the 2 nuts and differential support protector No.2 from the suspension member brace.



12. REMOVE DIFFERENTIAL SUPPORT PROTECTOR NO.1
HINT:
Removal procedure of the RH side is the same as that of the LH side.


13. REMOVE REAR SUSPENSION MEMBER BRACE LH


    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Remove the 2 bolts and suspension member brace.



14. REMOVE REAR SUSPENSION MEMBER BRACE RH
HINT:
Removal procedure of the RH side is the same as that of the LH side.


15. SEPARATE PARKING BRAKE CABLE ASSEMBLY NO.3


    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Remove the 2 bolts, and separate the parking brake cable No.3.



16. SEPARATE PARKING BRAKE CABLE ASSEMBLY NO.2
HINT:
Removal procedure of the RH side is the same as that of the LH side.


17. REMOVE REAR DRIVE SHAFT ASSEMBLY LH


    Lexus Gs430, Gs300. Uzs190 Grs190.Differential.Differential System.Rear Differential Carrier Assembly (For 3Uz-Fe) Removal

  1. Using SST, remove the rear drive shaft assembly.

    SST
    09520-01010
    09520-24010(09520-32040)
    NOTICE:
    1. Be careful not to damage the oil seal, inboard joint boot and drive shaft dust cover.
    2. Be careful not to drop the drive shaft assembly.


18. REMOVE REAR DRIVE SHAFT ASSEMBLY RH
HINT:
Removal procedure of the RH side is the same as that of the LH side.


19. DISCONNECT HEIGHT CONTROL SENSOR REAR LH


    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Disconnect the height control sensor connector.

  1. Remove the clamp from the rear suspension member.



20. REMOVE REAR SUSPENSION MEMBER BRACE REAR LOWER LH


    Lexus Gs430, Gs300. Uzs190 Grs190.Differential.Differential System.Rear Differential Carrier Assembly (For 3Uz-Fe) Removal

  1. Remove the 4 bolts and suspension member brace rear lower LH.



21. REMOVE REAR SUSPENSION MEMBER BRACE REAR LOWER RH

  1. Remove the 4 bolts and suspension member brace rear lower RH.



22. REMOVE REAR SUSPENSION MEMBER ASSEMBLY


    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Support the rear suspension member with a jack.

    HINT:
    Remove the rear suspension member along with the differential carrier assembly rear.

  1. Remove the 8 bolts, 2 rear suspension member stoppers, 2 differential support member stoppers and rear suspension member stopper lowers from the rear suspension member.

  1. Lower the jack slowly and remove the rear suspension member with the differential carrier assembly rear.



23. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY


    Lexus Gs430, Gs300. Uzs190 Grs190.Differential.Differential System.Rear Differential Carrier Assembly (For 3Uz-Fe) Removal

  1. Using a hexagon wrench (12 mm), remove the 3 hexagon bolts.

  1. Remove the 2 bolts, 2 differential mount stopper lowers and differential carrier rear.