Rear Bumper (For Standard) Reassembly

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Exterior Panels Trim. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL REAR NO. 2 BUMPER SIDE BRACKET (w/ Tire Carrier)

  2. INSTALL REFLEX REFLECTOR ASSEMBLY LH (w/o Rear Fog Light)

  3. INSTALL REFLEX REFLECTOR ASSEMBLY RH (w/o Rear Fog Light)

  4. INSTALL REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)

  5. INSTALL REAR FOG LIGHT ASSEMBLY RH (w/ Rear Fog Light)

  6. INSTALL REAR BUMPER ENERGY ABSORBER

  7. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

  8. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

  9. INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

  10. INSTALL NO. 2 FRAME WIRE

Rear Bumper (For Standard) -- Reassembly



1. INSTALL REAR NO. 2 BUMPER SIDE BRACKET (w/ Tire Carrier)

  1. Attach the 3 claws and 2 clips to install the rear No. 2 bumper side bracket and rear No. 3 bumper side bracket.

  1. Install the 2 screws.



2. INSTALL REFLEX REFLECTOR ASSEMBLY LH (w/o Rear Fog Light)

  1. Attach the claw to install the reflex reflector assembly LH.

  1. Install the 2 nuts.



3. INSTALL REFLEX REFLECTOR ASSEMBLY RH (w/o Rear Fog Light)
HINT:
Use the same procedure described for the LH side.


4. INSTALL REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the claw.

  1. Connector the connectors.

  1. Install the fog light with the 2 nuts.



5. INSTALL REAR FOG LIGHT ASSEMBLY RH (w/ Rear Fog Light)
HINT:
Use the same procedure described for the LH side.


6. INSTALL REAR BUMPER ENERGY ABSORBER

  1. Attach the 8 claws to install the rear bumper energy absorber.



7. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
HINT:
Use the same procedure to install the No. 1 ultrasonic sensor retainer on the other side.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Rear Bumper (For Standard) Reassembly

  1. Align the keyhole and protrusion as shown in the illustration.

    Text in Illustration
    *a
    		Protrusion
    *b
    		Keyhole
    NOTICE:
    1. Do not damage the bumper with the protrusion when installing the No. 1 ultrasonic sensor retainer.
    2. Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the rear bumper.
    HINT:
    The illustration shows the No. 1 ultrasonic sensor retainer for the RH corner. The vertical orientation of the No. 1 ultrasonic sensor retainers for the LH corner is opposite that of the image shown in the illustration.

  1. Attach the 2 claws to install the No. 1 ultrasonic sensor retainer.



8. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
HINT:
Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Rear Bumper (For Standard) Reassembly

  1. Align the keyhole and protrusion as shown in the illustration.

    Text in Illustration
    *a
    		Protrusion
    *b
    		Keyhole
    NOTICE:
    1. Do not damage the bumper with the protrusion when installing the No. 2 ultrasonic sensor retainer.
    2. Securely install the No. 2 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the rear bumper.

  1. Attach the 2 claws to install the No. 2 ultrasonic sensor retainer.



9. INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
HINT:
Use the same procedure for all No. 1 ultrasonic sensors.

  1. Attach the 2 claws to install the No. 1 ultrasonic sensor.

    NOTICE:
    Push the ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.


10. INSTALL NO. 2 FRAME WIRE

  1. w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light:
    Install the No. 2 frame wire.

    1. Attach the 12 clamps to install the No. 2 frame wire.

    2. Connect the 4 connectors.

  1. w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:
    Install the No. 2 frame wire.

    1. Attach the 14 clamps to install the No. 2 frame wire.

    2. Connect the 6 connectors.

  1. w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:
    Install the No. 2 frame wire.

    1. Attach the 13 clamps to install the No. 2 frame wire.

    2. Connect the 2 connectors.