CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for HID Headlight)
INSPECT TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ TOYOTA Parking Assist-sensor System)
Front Bumper (For Standard) -- Installation |
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
| 1. INSTALL FRONT UPPER CENTER BUMPER RETAINER |
Install the front upper center bumper retainer with the 3 bolts.
| 2. INSTALL HEADLIGHT ASSEMBLY LH |
for Halogen Headlight:
(Click here)
for HID Headlight:
(Click here)
| 3. INSTALL HEADLIGHT ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
| 4. INSTALL FRONT BUMPER SIDE SUPPORT LH |
Attach the 3 clips to install the front bumper side support LH.
Install the 2 screws.
| 5. INSTALL FRONT BUMPER SIDE SUPPORT RH |
- HINT:
- Use the same procedure described for the LH side.
| 6. INSTALL FRONT NO. 2 BUMPER EXTENSION SUB-ASSEMBLY LH |
Install the front No. 2 bumper extension sub-assembly LH with the 4 nuts.
- Torque:
- 67 N*m{683 kgf*cm, 49 ft.*lbf}
| 7. INSTALL FRONT NO. 2 BUMPER EXTENSION SUB-ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
| 8. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
Install the front bumper reinforcement sub-assembly with the 6 nuts.
- Torque:
- 71 N*m{724 kgf*cm, 52 ft.*lbf}
| 9. INSTALL FRONT BUMPER ENERGY ABSORBER |
Install the front bumper energy absorber.
| 10. INSTALL FRONT BUMPER COVER |
- HINT:
- For the front bumper cover with garnish, use the procedure described below.
w/ Headlight Cleaner System:
Connect the headlight cleaner hose.
 |
w/ TOYOTA Parking Assist-sensor System or w/ Fog Light:
Connect the No. 4 engine room wire connector.
Attach the 10 claws to install the front bumper cover.
Install the 3 clips, 4 screws and 4 bolts.
Using a T30 "TORX" socket, install the 6 screws.
| 11. INSTALL RADIATOR GRILLE ASSEMBLY |
w/ Wide View Front Monitor System:
Connect the connector.
Attach the 2 clips and 8 claws to install the radiator grille assembly.
Install the 3 screws.
| 12. INSTALL UPPER RADIATOR SUPPORT SEAL |
Install the radiator support seal with the 7 clips.
| 13. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH |
Push in the clip to install the front fender splash shield sub-assembly LH.
Install the 3 bolts and screw.
| 14. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH |
Push in the clip to install the front fender splash shield sub-assembly RH.
Install the 3 bolts and 2 screws.
| 15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for HID Headlight) |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 16. ADJUST HEADLIGHT AIMING |
for Halogen Headlight:
for HID Headlight:
| 17. ADJUST FOG LIGHT AIMING (w/ Fog Light) |
| 18. INSPECT TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ TOYOTA Parking Assist-sensor System) |