Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200
Headlight Dimmer Switch -- Inspection |
| 1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for LH Side) |
w/ Entry and Start System:
Inspect the light control switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-18 (T) - E14-15 (EL) Light control switch OFF 10 kΩ or higher E14-19 (H) - E14-15 (EL) E14-20 (A) - E14-15 (EL) E14-20 (A) - E14-15 (EL) Light control switch AUTO Below 1 Ω E14-18 (T) - E14-15 (EL) Light control switch tail Below 1 Ω E14-18 (T) - E14-15 (EL) Light control switch head Below 1 Ω E14-19 (H) - E14-15 (EL)
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/o Entry and Start System:
Inspect the light control switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-18 (T) - E14-12 (EL) Light control switch OFF 10 kΩ or higher E14-19 (A) - E14-12 (EL) E14-20 (H) - E14-12 (EL) E14-19 (A) - E14-12 (EL) Light control switch AUTO Below 1 Ω E14-18 (T) - E14-12 (EL) Light control switch tail Below 1 Ω E14-18 (T) - E14-12 (EL) Light control switch head Below 1 Ω E14-20 (H) - E14-12 (EL)
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/ Entry and Start System:
Inspect the headlight dimmer switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-14 (HU) - E14-15 (EL) Headlight dimmer switch flash Below 1 Ω E14-17 (HF) - E14-15 (EL) E14-14 (HU) - E14-15 (EL) Headlight dimmer switch high beam Below 1 Ω
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/o Entry and Start System:
Inspect the headlight dimmer switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-11 (HU) - E14-12 (EL) Headlight dimmer switch flash Below 1 Ω E14-17 (HF) - E14-12 (EL) E14-11 (HU) - E14-12 (EL) Headlight dimmer switch high beam Below 1 Ω
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/ Entry and Start System:
Inspect the turn signal light switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-11 (TL) - E14-15 (EL) Turn signal switch neutral 10 kΩ or higher E14-12 (TR) - E14-15 (EL) E14-13 (CR) - E14-15 (EL) E14-11 (TL) - E14-15 (EL) Turn signal switch left turn
(self cancel condition)Below 1 Ω E14-11 (TL) - E14-15 (EL) Turn signal switch left turn
(cancel ratchet operation condition)Below 1 Ω E14-11 (TL) - E14-13 (CR) E14-13 (CR) - E14-15 (EL) E14-12 (TR) - E14-15 (EL) Turn signal switch right turn
(self cancel condition)Below 1 Ω E14-12 (TR) - E14-15 (EL) Turn signal switch right turn
(cancel ratchet operation condition)Below 1 Ω E14-12 (TR) - E14-13 (CR) E14-13 (CR) - E14-15 (EL)
- HINT:
- The self cancel condition indicates when the turn signal switch returns to the neutral position after releasing your hand from the switch (switch is operated within 7°).
- The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even after releasing your hand (switch is operated within 12°).
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/o Entry and Start System:
Inspect the turn signal light switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-15 (TL) - E14-12 (EL) Turn signal switch neutral 10 kΩ or higher E14-13 (TR) - E14-12 (EL) E14-14 (CR) - E14-12 (EL) E14-15 (TL) - E14-12 (EL) Turn signal switch left turn
(self cancel condition)Below 1 Ω E14-15 (TL) - E14-12 (EL) Turn signal switch left turn
(cancel ratchet operation condition)Below 1 Ω E14-15 (TL) - E14-14 (CR) E14-14 (CR) - E14-12 (EL) E14-13 (TR) - E14-12 (EL) Turn signal switch right turn
(self cancel condition)Below 1 Ω E14-13 (TR) - E14-12 (EL) Turn signal switch right turn
(cancel ratchet operation condition)Below 1 Ω E14-13 (TR) - E14-14 (CR) E14-14 (CR) - E14-12 (EL)
- HINT:
- The self cancel condition indicates when the turn signal switch returns to the neutral position after releasing your hand from the switch (switch is operated within 7°).
- The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even after releasing your hand (switch is operated within 12°).
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/ Entry and Start System:
Inspect the front fog light switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-4 (BFG) - E14-8 (LFG) Front fog light switch off 10 kΩ or higher E14-4 (BFG) - E14-8 (LFG) Front fog light switch on Below 1 Ω
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/o Entry and Start System:
Inspect the front fog light switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-4 (BFG) - E14-3 (LFG) Front fog light switch off 10 kΩ or higher E14-4 (BFG) - E14-3 (LFG) Front fog light switch on Below 1 Ω
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/ Entry and Start System:
Inspect the rear fog light switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-7 (B) - E14-8 (LFG) Rear fog light switch off 10 kΩ or higher E14-7 (B) - E14-8 (LFG) Rear fog light switch on Below 1 Ω
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/o Entry and Start System:
Inspect the rear fog light switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-7 (B) - E14-3 (LFG) Rear fog light switch off 10 kΩ or higher E14-7 (B) - E14-3 (LFG) Rear fog light switch on Below 1 Ω
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
| 2. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for RH Side) |
w/ Entry and Start System:
Inspect the light control switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-11 (A) - E14-16 (EL) Light control switch OFF 10 kΩ or higher E14-12 (H) - E14-16 (EL) E14-13 (T) - E14-16 (EL) E14-11 (A) - E14-16 (EL) Light control switch AUTO Below 1 Ω E14-13 (T) - E14-16 (EL) Light control switch tail Below 1 Ω E14-12 (H) - E14-16 (EL) Light control switch head Below 1 Ω E14-13 (T) - E14-16 (EL)
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/o Entry and Start System:
Inspect the light control switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-11 (H) - E14-19 (EL) Light control switch OFF 10 kΩ or higher E14-12 (A) - E14-19 (EL) E14-13 (T) - E14-19 (EL) E14-12 (A) - E14-19 (EL) Light control switch AUTO Below 1 Ω E14-13 (T) - E14-19 (EL) Light control switch tail Below 1 Ω E14-11 (H) - E14-19 (EL) Light control switch head Below 1 Ω E14-13 (T) - E14-19 (EL)
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/ Entry and Start System:
Inspect the headlight dimmer switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-17 (HU) - E14-16 (EL) Headlight dimmer switch flash Below 1 Ω E14-14 (HF) - E14-16 (EL) E14-17 (HU) - E14-16 (EL) Headlight dimmer switch high beam Below 1 Ω
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/o Entry and Start System:
Inspect the headlight dimmer switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-14 (HF) - E14-19 (EL) Headlight dimmer switch flash Below 1 Ω E14-20 (HU) - E14-19 (EL) E14-20 (HU) - E14-19 (EL) Headlight dimmer switch high beam Below 1 Ω
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/ Entry and Start System:
Inspect the turn signal light switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-19 (TL) - E14-16 (EL) Turn signal switch neutral 10 kΩ or higher E14-20 (TR) - E14-16 (EL) E14-18 (CR) - E14-16 (EL) E14-19 (TL) - E14-16 (EL) Turn signal switch left turn
(self cancel condition)Below 1 Ω E14-19 (TL) - E14-16 (EL) Turn signal switch left turn
(cancel ratchet operation condition)Below 1 Ω E14-19 (TL) - E14-18 (CR) E14-18 (CR) - E14-16 (EL) E14-20 (TR) - E14-16 (EL) Turn signal switch right turn
(self cancel condition)Below 1 Ω E14-20 (TR) - E14-16 (EL) Turn signal switch right turn
(cancel ratchet operation condition)Below 1 Ω E14-20 (TR) - E14-18 (CR) E14-18 (CR) - E14-16 (EL)
- HINT:
- The self cancel condition indicates when the turn signal switch returns to the neutral position after releasing your hand from the switch (switch is operated within 7°).
- The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even after releasing your hand (switch is operated within 12°).
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/o Entry and Start System:
Inspect the turn signal light switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-18 (TL) - E14-19 (EL) Turn signal switch neutral 10 kΩ or higher E14-16 (TR) - E14-19 (EL) E14-17 (CR) - E14-19 (EL) E14-18 (TL) - E14-19 (EL) Turn signal switch left turn
(self cancel condition)Below 1 Ω E14-18 (TL) - E14-19 (EL) Turn signal switch left turn
(cancel ratchet operation condition)Below 1 Ω E14-18 (TL) - E14-17 (CR) E14-17 (CR) - E14-19 (EL) E14-16 (TR) - E14-19 (EL) Turn signal switch right turn
(self cancel condition)Below 1 Ω E14-16 (TR) - E14-19 (EL) Turn signal switch right turn
(cancel ratchet operation condition)Below 1 Ω E14-16 (TR) - E14-17 (CR) E14-17 (CR) - E14-19 (EL)
- HINT:
- The self cancel condition indicates when the turn signal switch returns to the neutral position after releasing your hand from the switch (switch is operated within 7°).
- The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even after releasing your hand (switch is operated within 12°).
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/ Entry and Start System:
Inspect the front fog light switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-2 (BFG) - E14-3 (LFG) Front fog light switch off 10 kΩ or higher E14-2 (BFG) - E14-3 (LFG) Front fog light switch on Below 1 Ω
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/o Entry and Start System:
Inspect the front fog light switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-7 (BFG) - E14-8 (LFG) Front fog light switch off 10 kΩ or higher E14-7 (BFG) - E14-8 (LFG) Front fog light switch on Below 1 Ω
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/ Entry and Start System:
Inspect the rear fog light switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-4 (B) - E14-3 (LFG) Rear fog light switch off 10 kΩ or higher E14-4 (B) - E14-3 (LFG) Rear fog light switch on Below 1 Ω
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
w/o Entry and Start System:
Inspect the rear fog light switch.Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition E14-9 (B) - E14-8 (LFG) Rear fog light switch off 10 kΩ or higher E14-9 (B) - E14-8 (LFG) Rear fog light switch on Below 1 Ω
Text in Illustration *a Component without harness connected
(Headlight Dimmer Switch Assembly)
