Lighting System Customize Parameters

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

  1. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)

Lighting System -- Customize Parameters



CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER
HINT:
The following items can be customized.
NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Customize Setting.

  5. Select the setting by referring to the table below.

    Main Body
    Display
    		Default
    		Contents
    		Setting
    Lighting Time
    		15s
    		To change the lighting time after closing the door. (It will quickly fade out in the case of turning the ignition switch to ON).
    		7.5s/15s/30s
    I/L when ACC OFF
    		ON
    		Function to light the interior light when the ignition switch is turned from ON to off.
    		ON/OFF
    I/L ON W/Door Key Unlock
    		ON
    		Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch.
    		ON/OFF
    Room Light when Aprchd
    		ON
    		Dome light illumination (when approaching vehicle)
    		ON/OFF
    Disp Ex ON Sen
    		NORMAL
    		Function to change the level of ambient light at which the system dims lights such as the combination meter indicator light, the A/C indicator light and the clock light.*1
    		LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
    Disp Ex OFF Sen
    		NORMAL
    		Function to change the level of ambient light at which the system cancels the dimming of lights such as the combination meter indicator light, the A/C indicator light and the clock light.*2
    		LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
    Sensitivity
    		NORMAL
    		Function to adjust the ambient light sensitivity of the automatic light control system.*3
    		LIGHT2/LIGHT1/NORMAL/DARK1/DARK2

    Light Control
    Display
    		Default
    		Contents
    		Setting
    DRL Function
    		ON
    		DRL control.
    		ON/OFF
    Automatic High Beam
    		ON
    		Automatic high beam system
    		ON/OFF
    HINT:
    The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

    *1
    System Setting

    Land Cruiser. Urj200, 202 Grj200 Vdj200

    Setting
    		DARK2
    		DARK1
    		NORMAL
    		LIGHT1
    		LIGHT2
    HINT:
    When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

    *2
    System Setting

    Land Cruiser. Urj200, 202 Grj200 Vdj200

    Setting
    		DARK2
    		DARK1
    		NORMAL
    		LIGHT1
    		LIGHT2
    HINT:
    When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

    *3
    System Setting

    Land Cruiser. Urj200, 202 Grj200 Vdj200

    Setting
    		DARK2
    		DARK1
    		NORMAL
    		LIGHT1
    		LIGHT2
    HINT:
    When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)
HINT:
The following items can be customized.
NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Turn the ignition switch to ON.

  2. Enter the following menus: Setup / Vehicle / Vehicle Settings / Vehicle Customization / Light Settings.

  3. Select the setting by referring to the table below.

    Display
    		Default
    		Contents
    		Setting
    Interior Lights Off Time
    		15 s
    		This function controls the interior lights.
    		OFF, 7.5 s, 15 s or 30 s
    Light Sensor Sensitivity
    		0
    (middle bar)
    		Adjusts the ambient light sensitivity of the automatic light control system.*
    		-2, -1, 0, +1 or +2
    Daytime Running Lights
    		ON
    		DRL control.
    		ON/OFF
    HINT:
    The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

    *
    System Setting

    Land Cruiser. Urj200, 202 Grj200 Vdj200

    Setting
    		-2
    		-1
    		0
    		+1
    		+2
    HINT:
    When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.