Power Back Door Main Switch Inspection

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Door Hatch. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT POWER BACK DOOR MAIN SWITCH

Power Back Door Main Switch -- Inspection



1. INSPECT POWER BACK DOOR MAIN SWITCH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Hatch.Tail Gate Closer System.Power Back Door Main Switch Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    6(MSE) - 9(MSW)
    		Not pushed (on)
    		Below 1 Ω
    6(MSE) - 9(MSW)
    		Pushed (off)
    		10 kΩ or higher
    If the result is not as specified, replace the power back door main switch.

  1. Apply battery voltage to the connector and check the LED illumination.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → terminal 8(ILL+)
    Battery negative (-) → terminal 7(ILL-)
    		Illuminates
    Text in Illustration
    *a
    		Component without harness connected
    (Power Back Door Main Switch)
    *b
    		Not pushed (on)
    *c
    		Pushed (off)