Hood Lock Control Cable Assembly -- Installation |
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
| 1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD) |
Pass the hood lock control cable assembly into the engine room.
Pass the cable rear side through the grommet until the cable stopper is attached to the grommet.
Pass the cable front side through the upper radiator support.
Connect the 6 clamps shown in the illustration.
Text in Illustration *a Clamp - -
| 2. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD) |
Pass the hood lock control cable assembly into the engine room.
Pass the cable rear side through the grommet until the cable stopper is attached to the grommet.
Pass the cable front side through the upper radiator support.
Connect the 6 clamps shown in the illustration.
Text in Illustration *a Clamp - -
| 3. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
Connect the hood lock control cable assembly and attach the 2 claws to install the hood lock lever sub-assembly.
 |
| 4. INSTALL HOOD LOCK ASSEMBLY |
Apply MP grease to the sliding areas of the hood lock assembly.
 |
Connect the hood lock control cable assembly.
 |
Install the hood lock assembly.
Install the 2 bolts and nut.
- Torque:
- 5.5 N*m{56 kgf*cm, 49 in.*lbf}
 |
Connect the connector.
| 5. INSTALL HOOD LOCK CONTROL CABLE COVER |
Attach the claw to install the hood lock control cable cover.
 |
Install the 3 screws.
| 6. REMOVE LOWER NO. 1 RADIATOR MOUNTING BRACKET |
Install the lower No. 1 radiator mounting bracket with the bolt.
 |
| 7. INSTALL FRONT FENDER MAIN SEAL LH (for LHD) |
Attach the 3 clips to install the front fender main seal LH.
 |
| 8. INSTALL FRONT FENDER MAIN SEAL RH (for RHD) |
Attach the 3 clips to install the front fender main seal RH.
 |
| 9. REMOVE FRONT BUMPER COVER |
for Standard:
(Click here)
w/ Winch:
(Click here)