Hood Lock Control Cable Assembly -- Removal |
| 1. REMOVE FRONT BUMPER COVER |
for Standard:
(Click here)
w/ Winch:
(Click here)
| 2. REMOVE FRONT FENDER MAIN SEAL LH (for LHD) |
Using a clip remover, detach the 3 clips and remove the front fender main seal LH.
 |
| 3. REMOVE FRONT FENDER MAIN SEAL RH (for RHD) |
Using a clip remover, detach the 3 clips and remove the front fender main seal RH.
 |
| 4. REMOVE LOWER NO. 1 RADIATOR MOUNTING BRACKET |
Remove the bolt and lower No. 1 radiator mounting bracket.
 |
| 5. REMOVE HOOD LOCK CONTROL CABLE COVER |
Remove the 3 screws.
 |
Detach the claw and remove the hood lock control cable cover.
| 6. REMOVE HOOD LOCK ASSEMBLY |
Remove the 2 bolts and nut.
 |
Remove the hood lock assembly.
Disconnect the connector.
Disconnect the hood lock control cable assembly.
 |
| 7. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
Detach the 2 claws.
 |
Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.
| 8. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD) |
| *a | Clamp | - | - |
Using a screwdriver, disconnect the 6 clamps shown in the illustration.
- HINT:
- Tape the screwdriver tip before use.
Pull the cable from the engine room and remove it.
| 9. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD) |
| *a | Clamp | - | - |
Using a screwdriver, disconnect the 6 clamps shown in the illustration.
- HINT:
- Tape the screwdriver tip before use.
Pull the cable from the engine room and remove it.