Power Window Regulator Motor (For Front Door) Removal

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Window Glass. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE FRONT LOWER DOOR FRAME BRACKET GARNISH

  4. REMOVE FRONT DOOR INSIDE HANDLE BEZEL

  5. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY

  6. REMOVE DOOR ASSIST GRIP COVER

  7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

  8. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY

  9. REMOVE FRONT DOOR SERVICE HOLE COVER

  10. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY

  11. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY

  12. REMOVE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY

Power Window Regulator Motor (For Front Door) -- Removal


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE FRONT LOWER DOOR FRAME BRACKET GARNISH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the clip and claw, and remove the front door lower frame bracket garnish LH.



4. REMOVE FRONT DOOR INSIDE HANDLE BEZEL


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 4 claws and remove the front door inside handle bezel LH.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Protective Tape


5. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a moulding remover, detach the 5 claws.

  1. Disconnect the connector and remove the armrest base panel.



6. REMOVE DOOR ASSIST GRIP COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a moulding remover, detach the 8 claws and remove the door assist grip cover LH.



7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Window Glass.Power Window Control System (For Models With Jam Protection Function On 4 Windows).Power Window Regulator Motor (For Front Door) Removal

  1. Remove the 3 screws.

  1. Remove the 13 clips.

  1. Remove the front inner door glass weatherstrip LH together with the front door trim board sub-assembly LH by pulling them upward in the order shown in the illustration.

    HINT:
    Make sure that the pin labeled A in the illustration is detached from the door panel.

  1. Disconnect the each connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the 2 cables from the front door inside handle sub-assembly LH.



8. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY

  1. Disconnect the speaker connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 4 screws and speaker.

    NOTICE:
    Do not touch the cone part of the speaker.


9. REMOVE FRONT DOOR SERVICE HOLE COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a clip remover, detach the 9 clamps.

  1. Remove the bolt and disconnect the 2 connectors.

  1. Remove the front door service hole cover LH.

    HINT:
    Remove the remaining tape on the door.


10. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY

  1. Driver Side:
    Temporarily install the multiplex network master switch.

  1. Passenger Side:
    Temporarily install the power window regulator switch assembly.

  1. Connect the cable to the negative (-) battery terminal.

  1. Move the front door glass sub-assembly until the bolts appear in the service holes.

  1. Disconnect the cable from the negative (-) battery terminal.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 bolts.

    NOTICE:
    Be careful when removing the bolts as the glass may fall and become damaged.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the front door glass sub-assembly in the direction indicated by the arrows in the illustration.

    HINT:
    Remove the front door glass sub-assembly upward.
    NOTICE:
    Be careful not to damage the glass.

  1. Driver Side:
    Remove the multiplex network master switch.

  1. Passenger Side:
    Remove the power window regulator switch assembly.



11. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Window Glass.Power Window Control System (For Models With Jam Protection Function On 4 Windows).Power Window Regulator Motor (For Front Door) Removal

  1. Loosen the temporary bolt.

    Text in Illustration
    *a
    		Temporary Bolt

  1. Remove the 5 bolts, and front door window regulator sub-assembly LH.

    HINT:
    Remove the front door window regulator sub-assembly LH through the service hole.
    NOTICE:
    Be careful when removing the bolts as the front door window regulator sub-assembly LH may fall and become damaged.

  1. Remove the front door window regulator sub-assembly LH and the front power window regulator motor assembly LH as a unit.

  1. Remove the temporary bolt from the front door window regulator sub-assembly LH.



12. REMOVE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Window Glass.Power Window Control System (For Models With Jam Protection Function On 4 Windows).Power Window Regulator Motor (For Front Door) Removal

  1. Using a T25 "TORX" driver, remove the 3 screws and front power window regulator motor assembly.

    NOTICE:
    Be careful when removing the screws as the motor may fall and become damaged.
    Text in Illustration
    *a
    		 for Models with Jam Protection Function on 4 Windows
    *b
    		for Front Passenger Side, for Models with Jam Protection Function on Driver Door Window Only