Power Window Control System (For Models With Jam Protection Function On Driver Door Window Only) Data List / Active Test

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Window Glass. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. READ DATA LIST

  1. PERFORM ACTIVE TEST

Power Window Control System (For Models With Jam Protection Function On Driver Door Window Only) -- Data List / Active Test



READ DATA LIST
HINT:
Using the intelligent tester to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / Data List.

  5. According to the display on the intelligent tester, read the Data List.

    Master Switch
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    D Door P/W Auto SW
    		Driver side power window auto up/down signal / ON or OFF
    		ON: Driver side power window auto up/down switch on multiplex network master switch operated
    OFF: Driver side power window switch on multiplex network master switch not operated
    		-
    P Door P/W Up SW
    		Front passenger side power window remote manual up signal / ON or OFF
    		ON: Front passenger side power window remote manual up switch on multiplex network master switch operated
    OFF: Front passenger side power window switch on multiplex network master switch not operated
    		-
    RR Door P/W up switch
    		Rear power window RH remote manual up signal / ON or OFF
    		ON: Rear power window RH remote manual up switch on multiplex network master switch operated
    OFF: Rear power window switch RH on multiplex network master switch not operated
    		-
    RL Door P/W up switch
    		Rear power window LH remote manual up signal / ON or OFF
    		ON: Rear power window LH remote manual up switch on multiplex network master switch operated
    OFF: Rear power window switch LH on multiplex network master switch not operated
    		-
    P Door P/W Down SW
    		Front passenger side power window remote manual down signal / ON or OFF
    		ON: Front passenger side power window remote manual down switch on multiplex network master switch operated
    OFF: Front passenger side power window switch on multiplex network master switch not operated
    		-
    RR Door P/W Down SW
    		Rear power window RH remote manual down signal / ON or OFF
    		ON: Rear power window RH remote manual down switch on multiplex network master switch operated
    OFF: Rear power window switch RH on multiplex network master switch not operated
    		-
    RL Door P/W Down SW
    		Rear power window LH remote manual down signal / ON or OFF
    		ON: Rear power window LH remote manual down switch on multiplex network master switch operated
    OFF: Rear power window switch LH on multiplex network master switch not operated
    		-
    Window Lock Switch Status
    		Power window lock switch / ON or OFF
    		ON: Power window lock switch on
    OFF: Power window lock switch off
    		-
    Number of Trouble Codes
    		Number of trouble codes / Min.: 0, Max.: 255
    		Number of DTCs will be displayed
    		-

    D-Door Motor
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    D Door P/W Auto SW
    		Driver side power window auto up/down signal / ON or OFF
    		ON: Driver side power window auto up/down switch operated
    OFF: Driver side power window switch not operated
    		-
    D Door P/W Up SW
    		Driver side power window manual up signal / ON or OFF
    		ON: Driver side power window manual up switch operated
    OFF: Driver side power window switch not operated
    		-
    D Door P/W Down SW
    		Driver side power window manual down signal / ON or OFF
    		ON: Driver side power window manual down switch operated
    OFF: Driver side power window switch not operated
    		-
    Glass Position (Close-1/4)
    		Jam protection status of window glass within range of fully closed to 1/4 open position / OK or Caution
    		OK: Motor normally operates between fully closed to 1/4 open position
    Caution: Jam protection function operates due to detection of foreign object or irregular movement
    		-
    Glass Position (1/4-2/4)
    		Jam protection status of window glass within range of 1/4 to 1/2 open position / OK or Caution
    		OK: Motor normally operates between 1/4 to 1/2 open position
    Caution: Jam protection function operates due to detection of foreign object or irregular movement
    		-
    Glass Position (2/4-3/4)
    		Jam protection status of window glass within range of 1/2 to 3/4 open position / OK or Caution
    		OK: Motor normally operates between 1/2 to 3/4 open position
    Caution: Jam protection function operates due to detection of foreign object or irregular movement
    		-
    Glass Position (3/4-Open)
    		Jam protection status of window glass within range of 3/4 to fully open position / OK or Caution
    		OK: Motor normally operates between 3/4 to fully open position
    Caution: Jam protection function operates due to detection of foreign object or irregular movement
    		-
    D Window Auto Up
    		Auto up operation using the multiplex network master switch assembly / OFF or ON
    		Customization status display
    		-
    D Window Auto Down
    		Auto down operation using the multiplex network master switch assembly / OFF or ON
    		Customization status displayed
    		-
    Number of Trouble Codes
    		Number of trouble codes / Min.: 0, Max.: 255
    		Number of DTCs will displayed
    		-

    Main Body
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Communication D-Door Motor
    		Connection status between power window regulator motor (for driver side) and main body ECU / OK or Stop
    		OK: Connection
    Stop: No connection
    		-
    D Door Courtesy SW
    		Driver side door courtesy signal / ON or OFF
    		ON: Driver door open
    OFF: Driver door closed
    		-
    P Door Courtesy SW
    		Front passenger side door courtesy signal / ON or OFF
    		ON: Front passenger door open
    OFF: Front passenger door closed
    		-
    RL Door Courtesy SW
    		Rear LH side door courtesy signal / ON or OFF
    		ON: Rear LH side door open
    OFF: Rear LH side door closed
    		-
    RR Door Courtesy SW
    		Rear RH side door courtesy signal / ON or OFF
    		ON: Rear RH side door open
    OFF: Rear RH side door closed
    		-


PERFORM ACTIVE TEST
HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / Active Test.

  5. According to the display on the intelligent tester, perform the Active Test.

    CAUTION:
    Be careful to avoid injuries as this test causes vehicle parts to move. During the Active Test, the jam protection function does not operate.

    D-Door Motor
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Power Window
    		Driver side power window
    		OFF/UP/DOWN
    		-