Roof Headlining (W/ Sliding Roof) Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Interior Panels Trim. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (except Face to Face Seat Type)

  4. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)

  5. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (for Face to Face Seat Type)

  6. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)

  7. REMOVE FRONT DOOR SCUFF PLATE LH

  8. REMOVE FRONT DOOR SCUFF PLATE RH

  9. REMOVE REAR STEP COVER

  10. REMOVE REAR DOOR SCUFF PLATE LH

  11. REMOVE REAR DOOR SCUFF PLATE RH

  12. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

  13. REMOVE ASSIST GRIP SUB-ASSEMBLY

  14. REMOVE FRONT PILLAR GARNISH LH

  15. REMOVE FRONT PILLAR GARNISH RH

  16. REMOVE CENTER PILLAR GARNISH COVER LH

  17. REMOVE CENTER PILLAR GARNISH COVER RH

  18. REMOVE CENTER LOWER PILLAR GARNISH LH

  19. REMOVE CENTER LOWER PILLAR GARNISH RH

  20. REMOVE REAR ASSIST GRIP ASSEMBLY

  21. REMOVE CENTER PILLAR GARNISH LH

  22. REMOVE CENTER PILLAR GARNISH RH

  23. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  24. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

  25. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

  26. REMOVE REAR FRONT QUARTER TRIM GARNISH LH

  27. REMOVE REAR FRONT QUARTER TRIM GARNISH RH

  28. REMOVE REAR UPPER PILLAR GARNISH LH

  29. REMOVE CENTER BACK DOOR GARNISH (w/ Power Back Door)

  30. REMOVE BACK DOOR SIDE GARNISH RH (w/ Power Back Door)

  31. REMOVE BACK DOOR SERVICE HOLE COVER RH (w/ Power Back Door)

  32. REMOVE REAR UPPER PILLAR GARNISH RH

  33. REMOVE MAP LIGHT ASSEMBLY

  34. REMOVE NO. 1 ROOM LIGHT ASSEMBLY

  35. REMOVE NO. 3 ROOM LIGHT ASSEMBLY

  36. REMOVE VISOR BRACKET COVER

  37. REMOVE VISOR ASSEMBLY LH

  38. REMOVE VISOR ASSEMBLY RH

  39. REMOVE VISOR HOLDER

  40. REMOVE CENTER VISOR ASSEMBLY LH (w/ Sub Visor)

  41. REMOVE CENTER VISOR ASSEMBLY RH (w/ Sub Visor)

  42. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

  43. REMOVE RAIN SENSOR COVER (w/ Rain Sensor)

  44. REMOVE NO. 2 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)

  45. REMOVE NO. 1 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)

  46. REMOVE SEAT BELT ANCHOR COVER (for 3 Person Seat Type Rear No. 2 Seat)

  47. REMOVE ASSIST GRIP ASSEMBLY

  48. REMOVE NO. 2 ASSIST GRIP ASSEMBLY LH

  49. REMOVE NO. 2 ASSIST GRIP ASSEMBLY RH

  50. REMOVE 3RD SEAT ASSIST GRIP ASSEMBLY (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  51. REMOVE ROOF HEADLINING ASSEMBLY

  52. REMOVE FRONT ROOF SIDE RAIL GARNISH LH

  53. REMOVE FRONT ROOF SIDE RAIL GARNISH RH

  54. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

  55. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

  56. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

  57. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

  58. REMOVE BACK DOOR WEATHERSTRIP

  59. REMOVE FRONT DOOR SCUFF PLATE OUTSIDE LH

  60. REMOVE FRONT DOOR SCUFF PLATE RH

  61. REMOVE REAR DOOR SCUFF PLATE OUTSIDE LH

  62. REMOVE REAR DOOR SCUFF PLATE OUTSIDE RH

  63. REMOVE FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH

  64. REMOVE FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH

  65. REMOVE REAR SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH

  66. REMOVE REAR SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH

  67. REMOVE ROOF SIDE INNER GARNISH COVER LH (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  68. REMOVE ROOF SIDE INNER GARNISH COVER RH (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  69. REMOVE REAR SEAT SHOULDER BELT HANGER (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  70. REMOVE REAR NO. 2 SEAT SHOULDER BELT HANGER LH

  71. REMOVE REAR NO. 2 SEAT SHOULDER BELT HANGER RH

  72. REMOVE QUARTER TRIM COVER SUB-ASSEMBLY LH

  73. REMOVE QUARTER TRIM COVER SUB-ASSEMBLY RH

  74. REMOVE NO. 2 CUP HOLDER

  75. REMOVE NO. 1 CUP HOLDER

  76. REMOVE NO. 1 SIDE TRIM BASE COVER LH (w/ Rear Heater)

  77. REMOVE NO. 1 SIDE TRIM BASE COVER RH (w/ Rear Heater)

  78. REMOVE NO. 2 SIDE TRIM BASE COVER LH (w/ Rear Heater)

  79. REMOVE NO. 2 SIDE TRIM BASE COVER RH (w/ Rear Heater)

  80. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  81. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  82. REMOVE REAR NO. 2 SEAT COVER BEZEL (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  83. REMOVE REAR NO. 1 SEAT COVER BEZEL (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  84. REMOVE QUARTER TRIM COVER LH (w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type)

  85. REMOVE QUARTER TRIM COVER RH (w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type)

  86. REMOVE QUARTER TRIM LID SUB-ASSEMBLY RH

  87. REMOVE SIDE TRIM BOX COVER

  88. REMOVE SIDE TRIM BOX

Roof Headlining (W/ Sliding Roof) -- Removal


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (except Face to Face Seat Type)
(Click here)


4. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side.


5. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (for Face to Face Seat Type)
(Click here)


6. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side.


7. REMOVE FRONT DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 7 claws and 4 clips, and remove the front door scuff plate LH.



8. REMOVE FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


9. REMOVE REAR STEP COVER
HINT:
Use the same procedure for both rear step covers.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the rear step cover.



10. REMOVE REAR DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the screw.

  1. Detach the 3 claws and 4 clips, and remove the rear door scuff plate LH.



11. REMOVE REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


12. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 6 clips and remove the rear floor mat support plate.



13. REMOVE ASSIST GRIP SUB-ASSEMBLY
HINT:
Use the same procedure for both assist grip sub-assemblies.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws and remove the 2 assist grip plugs.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 bolts.

  1. Detach the 2 claws and remove the assist grip sub-assembly.



14. REMOVE FRONT PILLAR GARNISH LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the clip 3 guides, and remove the front pillar garnish LH.

  1. w/ Speaker:
    Disconnect the speaker connector and then remove the front pillar garnish.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Protect the curtain shield airbag.

    1. Thoroughly cover the airbag with a cloth or nylon sheet and fix the ends of the cover with adhesive tape, as shown in the illustration.

      NOTICE:
      Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.
      Text in Illustration
      *a
      		Adhesive Tape
      *b
      		Protective Cover
      *c
      		Curtain Shield Airbag Assembly LH


15. REMOVE FRONT PILLAR GARNISH RH
HINT:
Use the same procedures described for the LH side.


16. REMOVE CENTER PILLAR GARNISH COVER LH
HINT:
  1. for Manual Seat:
    When removing the center pillar garnish cover LH, move the front seat and seatback to the foremost upright position.
  2. for Power Seat:
    When removing the center pillar garnish cover LH, connect the cable to the negative (-) battery terminal and operate the power seat switch to move the front seat and seatback to the foremost upright position.
  3. for Power Seat:
    After moving the front seat, disconnect the cable from the negative (-) battery terminal.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 clips and 2 guides, and remove the center pillar garnish cover LH.



17. REMOVE CENTER PILLAR GARNISH COVER RH
HINT:
Use the same procedures described for the LH side.


18. REMOVE CENTER LOWER PILLAR GARNISH LH
HINT:
  1. for Manual Seat:
    When removing the center lower pillar garnish LH, move the front seat and seatback to the foremost upright position.
  2. for Power Seat:
    When removing the center lower pillar garnish LH, connect the cable to the negative (-) battery terminal and operate the power seat switch to move the front seat and seatback to the foremost upright position.
  3. for Power Seat:
    After moving the front seat, disconnect the cable from the negative (-) battery terminal.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and seat belt anchor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and 7 clips, and remove the center lower pillar garnish LH.



19. REMOVE CENTER LOWER PILLAR GARNISH RH
HINT:
Use the same procedures described for the LH side.


20. REMOVE REAR ASSIST GRIP ASSEMBLY
HINT:
Use the same procedure for both rear assist grip assemblies.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws and remove the 2 assist grip plugs.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 bolts.

  1. Detach the 2 claws and remove the rear assist grip assembly.



21. REMOVE CENTER PILLAR GARNISH LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt.

  1. Detach the 2 clips and 2 guides.

  1. Pass the seat belt anchor through the center pillar garnish, and remove the center pillar garnish LH.



22. REMOVE CENTER PILLAR GARNISH RH
HINT:
Use the same procedures described for the LH side.


23. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedure for both No. 1 luggage compartment trim hooks.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *a
    		Protective Tape


24. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
When removing the front quarter trim panel assembly LH, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 3 claws and remove the outer lap belt anchor cover.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and rear No. 1 seat belt anchor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:
    Remove the bolt and rear No. 2 seat belt anchor.



  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Remove the clip and bolt.

    2. Detach the 18 clips and 2 claws.

    3. w/o Rear Air Conditioning System:
      Disconnect the rear seat lock control lever cable and then remove the front quarter trim panel assembly LH.



    4. w/ Rear Air Conditioning System:
      Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the front quarter trim panel assembly LH.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal



  1. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:

    1. Remove the clip.



    2. Detach the 18 clips and 2 claws, and remove the front quarter trim panel assembly LH.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal



25. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
When removing the front quarter trim panel assembly RH, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 3 claws and remove the outer lap belt anchor cover.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and rear No. 1 seat belt anchor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Detach the 3 claws and remove the outer lap belt anchor cover.



      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Remove the bolt and rear No. 2 seat belt anchor.



  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Remove the clip and bolt.

    2. Detach the 16 clips and 2 claws.

    3. w/o Rear Air Conditioning System:
      Disconnect the rear seat lock control lever cable and then remove the front quarter trim panel assembly RH.



    4. w/ Rear Air Conditioning System:
      Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the front quarter trim panel assembly RH.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal



  1. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:

    1. Remove the clip.



    2. Detach the 16 clips and 2 claws, and remove the front quarter trim panel assembly RH.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal



26. REMOVE REAR FRONT QUARTER TRIM GARNISH LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the screw.

  1. Detach the clip and 2 guides.

  1. Pass the seat belt anchor through the rear front quarter trim garnish LH, and remove the rear front quarter trim garnish LH.



27. REMOVE REAR FRONT QUARTER TRIM GARNISH RH
HINT:
Use the same procedures described for the LH side.


28. REMOVE REAR UPPER PILLAR GARNISH LH


  1. w/ Rear No. 2 Seat, except Face to Face Seat Type



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

    1. Using a screwdriver, detach the 2 claws and open the seat belt shoulder anchor cover.

      HINT:
      Tape the screwdriver tip before use.
      Text in Illustration
      *a
      		Protective Tape


      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Remove the bolt and seat belt shoulder anchor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 5 clips and remove the rear upper pillar garnish LH.



29. REMOVE CENTER BACK DOOR GARNISH (w/ Power Back Door)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 5 clips and 4 claws, and remove the center back door garnish.

  1. Disconnect the connector.



30. REMOVE BACK DOOR SIDE GARNISH RH (w/ Power Back Door)

  1. w/o Power Back Door:

    HINT:
    Use the same procedure described for the LH side.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Power Back Door:

    1. Detach the clip and 4 claws, and remove the back door side garnish RH.



31. REMOVE BACK DOOR SERVICE HOLE COVER RH (w/ Power Back Door)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Move the back door to a half-open position so that the hole in the center of the back door service hole cover RH is aligned lengthwise with the power back door rod.

    Text in Illustration
    *1
    		Power Back Door Rod
    *2
    		Hole of Back Door Service Hole Cover RH
    *a
    		Back Door is Half-open


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 clips and separate the back door service hole cover RH, passing the power back door rod through the hole of the back door service hole cover RH.

    NOTICE:
    If the back door is in a fully-open position, the power back door rod will interfere with the hole of the back door service hole cover RH, so do not perform this operation with the back door in a fully open position.
    HINT:
    If any of the clips have remained on the back door, remove the clips from the back door and install them to the back door service hole cover RH.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the ball joint bolt, power back door rod and back door stay plate.

  1. Remove the back door service hole cover RH from the power back door rod.



32. REMOVE REAR UPPER PILLAR GARNISH RH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Using a screwdriver, detach the 2 claws and open the seat belt shoulder anchor cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *a
    		Protective Tape


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and seat belt shoulder anchor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/o Power Back Door:

    1. Detach the 5 clips and remove the rear upper pillar garnish RH.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. w/ Power Back Door:

    1. Detach the 5 clips.

    2. Pass the power back door rod through the rear upper pillar garnish, and remove the rear upper pillar garnish RH.

      Text in Illustration
      *a
      		Power Back Door Rod


33. REMOVE MAP LIGHT ASSEMBLY

  1. w/ Sliding Roof:

    1. Using a screwdriver, detach the 2 claws and open the 2 covers.

      HINT:
      Tape the screwdriver tip before use.

  1. Remove the 2 screws.

  1. Detach the 2 clips and 2 guides.



  1. Disconnect the connectors and remove the map light assembly.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal


    Text in Illustration
    *a
    		Protective Tape
    		-
    		-

  1. w/o Sliding Roof:

    1. Using a screwdriver, detach the 2 claws and open the 2 covers.

      HINT:
      Tape the screwdriver tip before use.

  1. Remove the 2 screws.

  1. Detach the 2 clips and 2 guides.



  1. Disconnect the connectors and remove the map light assembly.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal


    Text in Illustration
    *a
    		Protective Tape
    		-
    		-


34. REMOVE NO. 1 ROOM LIGHT ASSEMBLY

  1. for Bulb Type:
    (Click here)

  1. for LED Type:
    (Click here)



35. REMOVE NO. 3 ROOM LIGHT ASSEMBLY


  1. for Bulb Type:



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

    1. Using a screwdriver, detach the 4 claws and remove the room light lens.

      HINT:
      Tape the screwdriver tip before use.
      Text in Illustration
      *a
      		Protective Tape


      2. Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

    2. Using a screwdriver, push the 2 levers in the directions indicated by the arrows shown in the illustration to detach the 2 claws (A).

    3. Detach the 2 claws (B).

    4. Detach the 4 claws and remove the No. 3 room light assembly from the room light switch base.



  1. for LED Type:



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

    1. Using a screwdriver, detach the 4 claws and remove the room light lens.

      HINT:
      Tape the screwdriver tip before use.
      Text in Illustration
      *a
      		Protective Tape


      2. Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

    2. Using a screwdriver, push the 2 levers in the directions indicated by the arrows shown in the illustration to detach the 2 claws (A).

    3. Detach the 2 claws (B).

    4. Disconnect the connector and remove the No. 3 room light assembly.



36. REMOVE VISOR BRACKET COVER
HINT:
Use the same procedure for both visor bracket covers.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws and remove the visor bracket cover.



37. REMOVE VISOR ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 screws and visor assembly LH.



38. REMOVE VISOR ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.


39. REMOVE VISOR HOLDER
HINT:
Use the same procedure for both visor holders.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Turn the visor holder approximately 45° and pull it out as shown in the illustration.

  1. Detach the 2 claws and remove the visor holder.



40. REMOVE CENTER VISOR ASSEMBLY LH (w/ Sub Visor)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Using a screwdriver, pry off the cover to detach the 2 clips and remove the center visor assembly LH.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *a
    		Protective Tape
    *b
    		Cover


41. REMOVE CENTER VISOR ASSEMBLY RH (w/ Sub Visor)
HINT:
Use the same procedures described for the LH side.


42. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)


  1. w/ EC Mirror:



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Detach the 2 claws and slide the inner rear view mirror stay holder cover in the direction indicated by the arrow shown in the illustration.



      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Detach the 2 claws and remove the inner rear view mirror stay holder cover.



  1. w/ Automatic High Beam System:



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Detach the 2 claws and slide the inner rear view mirror stay holder cover in the direction indicated by the arrow shown in the illustration.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the inner rear view mirror stay holder cover.



43. REMOVE RAIN SENSOR COVER (w/ Rain Sensor)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Slide the rain sensor cover as shown in the illustration and detach the 2 guides.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Release the stopper by pulling it down.

    Text in Illustration
    *a
    		Stopper
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Unlock
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Remove

  1. Remove the rain sensor with rain sensor cover as shown in the illustration.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the rain sensor cover.



44. REMOVE NO. 2 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Detach the 2 claws and 2 guides and remove the No. 2 forward recognition cover as shown in the illustration.

    NOTICE:
    If these claws are detached separately, they may break. Detach the claws simultaneously.


45. REMOVE NO. 1 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 clips and 2 guides and remove the No. 1 forward recognition cover as shown in the illustration.

    NOTICE:
    Push the cover while keeping it parallel with the surface of the glass so as not to damage the clips and guides.


46. REMOVE SEAT BELT ANCHOR COVER (for 3 Person Seat Type Rear No. 2 Seat)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 clips and 4 guides, and remove the seat belt anchor cover.



47. REMOVE ASSIST GRIP ASSEMBLY
HINT:
Use the same procedure for both assist grip assemblies.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Using a screwdriver, detach the 4 claws and remove the 2 assist grip covers.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *a
    		Protective Tape

  1. Detach the 2 clips and remove the assist grip assembly.

  1. Remove the 2 clips from the vehicle body.



48. REMOVE NO. 2 ASSIST GRIP ASSEMBLY LH


  1. w/ Rear No. 2 Seat, except Face to Face Seat Type or w/o Rear No. 2 Seat:
    Remove the No. 2 assist grip assembly.



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

    1. Using a screwdriver, detach the 4 claws and remove the 2 assist grip covers.

      HINT:
      Tape the screwdriver tip before use.
      Text in Illustration
      *a
      		Protective Tape

    2. Detach the 2 clips and remove the No. 2 assist grip assembly LH.

    3. Remove the 2 clips from the vehicle body.



  1. w/ Rear No. 2 Seat, for Face to Face Seat Type:
    Remove the No. 2 assist grip assembly.



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

    1. Using a screwdriver, detach the 4 claws and remove the 2 assist grip covers.

      HINT:
      Tape the screwdriver tip before use.
      Text in Illustration
      *a
      		Protective Tape

    2. Detach the 2 clips and remove the No. 2 assist grip assembly LH.

    3. Remove the 2 clips from the vehicle body.



49. REMOVE NO. 2 ASSIST GRIP ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.


50. REMOVE 3RD SEAT ASSIST GRIP ASSEMBLY (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedure for both 3rd seat assist grip assemblies.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Using a screwdriver, detach the 4 claws and remove the 2 assist grip covers.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *a
    		Protective Tape

  1. Detach the 2 clips and remove the 3rd seat assist grip assembly.

  1. Remove the 2 clips from the vehicle body.



51. REMOVE ROOF HEADLINING ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
  1. for Manual Seat:
    When removing the roof headlining assembly, move the front seat and rear No. 1 seat to the position shown in the illustration.
  2. for Power Seat:
    When removing the roof headlining assembly, connect the cable to the negative (-) battery terminal and move the front seat and No. 1 rear seat to the position shown in the illustration.
  3. for Power Seat:
    After moving the seats, disconnect the cable from the negative (-) battery terminal.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ EC Mirror:
    Disconnect the connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rain Sensor:
    Disconnect the connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Pre-crash Safety System:
    Disconnect the connectors.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Disconnect the 3 roof wire connectors and washer hose.

  1. Detach the 4 clamps.

    Text in Illustration
    *a
    		Front Left Side
    *b
    		Washer Hose


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Remove the bolt.

  1. Disconnect the antenna cord connector and detach the 2 clamps.

    Text in Illustration
    *a
    		Front Right Side


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Disconnect the antenna cord connector.

    Text in Illustration
    *a
    		Rear Right Side


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Disconnect the washer hose.

    Text in Illustration
    *a
    		Rear Left Side


  1. for 3 Person Seat Type Rear No. 2 Seat:
    Detach the 12 claws, 2 clips, 2 guides and 16 fasteners.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal


    Text in Illustration
    *A
    		for 3 Person Seat Type Rear No. 2 Seat
    		-
    		-
    *a
    		Guide
    		-
    		-


  1. except 3 Person Seat Type Rear No. 2 Seat:
    Detach the 12 claws, 3 clips, 2 guides and 16 fasteners.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal


    Text in Illustration
    *A
    		except 3 Person Seat Type Rear No. 2 Seat
    		-
    		-
    *a
    		Guide
    		-
    		-


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the roof headlining assembly from the rear of the vehicle as shown in the illustration.

    NOTICE:
    Be careful not to damage the roof headlining assembly when taking it out.


52. REMOVE FRONT ROOF SIDE RAIL GARNISH LH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Detach the 3 clips.

  1. Cut off the 3 clips and remove the front roof side rail garnish LH.

  1. Remove 3 clips from the vehicle body.

    Text in Illustration
    *a
    		Cut Off Position


53. REMOVE FRONT ROOF SIDE RAIL GARNISH RH
HINT:
Use the same procedures described for the LH side.


54. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the front door opening trim weatherstrip LH.



55. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
HINT:
Use the same procedures described for the LH side.


56. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the rear door opening trim weatherstrip LH.



57. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
HINT:
Use the same procedures described for the LH side.


58. REMOVE BACK DOOR WEATHERSTRIP


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the back door weatherstrip.



59. REMOVE FRONT DOOR SCUFF PLATE OUTSIDE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Put protective tape around the front door scuff plate outside LH.

    Text in Illustration
    *a
    		Protective Tape

  1. Detach the 4 clips and remove the front door scuff plate outside LH.



60. REMOVE FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


61. REMOVE REAR DOOR SCUFF PLATE OUTSIDE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Put protective tape around the rear door scuff plate outside LH.

    Text in Illustration
    *a
    		Protective Tape

  1. Detach the 3 clips and remove the rear door scuff plate outside LH.



62. REMOVE REAR DOOR SCUFF PLATE OUTSIDE RH
HINT:
Use the same procedures described for the LH side.


63. REMOVE FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 6 claws of the front shoulder belt anchor plate sub-assembly LH, and slide the front shoulder belt anchor plate sub-assembly LH in the direction of the arrow to remove it.



64. REMOVE FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.


65. REMOVE REAR SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 6 claws and remove the rear shoulder belt anchor plate sub-assembly LH.



66. REMOVE REAR SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.


67. REMOVE ROOF SIDE INNER GARNISH COVER LH (w/ Rear No. 2 Seat, except Face to Face Seat Type)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 7 claws and remove the roof side inner garnish cover LH.



68. REMOVE ROOF SIDE INNER GARNISH COVER RH (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side.


69. REMOVE REAR SEAT SHOULDER BELT HANGER (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedure for both rear No. 1 seat shoulder belt hangers.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Remove the 2 spring nuts and rear No. 1 seat shoulder belt hanger.

    Text in Illustration
    *a
    		Spring Nut


70. REMOVE REAR NO. 2 SEAT SHOULDER BELT HANGER LH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/ Sliding Roof) Removal

  1. Remove the 2 spring nuts and rear No. 2 seat shoulder belt hanger.

    Text in Illustration
    *a
    		Spring Nut


71. REMOVE REAR NO. 2 SEAT SHOULDER BELT HANGER RH
HINT:
Use the same procedures described for the LH side.


72. REMOVE QUARTER TRIM COVER SUB-ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear Heater:
    Remove the 8 screws and duct.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 7 screws.

  1. Detach the 4 claws and remove the quarter trim cover sub-assembly LH.



73. REMOVE QUARTER TRIM COVER SUB-ASSEMBLY RH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 7 screws.

  1. Detach the 4 claws and remove the quarter trim cover sub-assembly RH.



74. REMOVE NO. 2 CUP HOLDER


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 5 screws.

  1. Detach the 3 claws and remove the No. 2 cup holder.



75. REMOVE NO. 1 CUP HOLDER


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 5 screws.

  1. Detach the 3 claws and remove the No. 1 cup holder.



76. REMOVE NO. 1 SIDE TRIM BASE COVER LH (w/ Rear Heater)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws and remove the No. 1 side trim base cover LH.



77. REMOVE NO. 1 SIDE TRIM BASE COVER RH (w/ Rear Heater)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 6 screws and duct.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws and remove the No. 1 side trim base cover RH.



78. REMOVE NO. 2 SIDE TRIM BASE COVER LH (w/ Rear Heater)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws and remove the No. 2 side trim base cover LH.



79. REMOVE NO. 2 SIDE TRIM BASE COVER RH (w/ Rear Heater)
HINT:
Use the same procedures described for the LH side.


80. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  1. Detach the 4 claws and remove the seat lock control lever.



81. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side.


82. REMOVE REAR NO. 2 SEAT COVER BEZEL (w/ Rear No. 2 Seat, except Face to Face Seat Type)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 6 clips and remove the rear No. 2 seat cover bezel.



83. REMOVE REAR NO. 1 SEAT COVER BEZEL (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedures described for the rear No. 2 seat cover bezel.


84. REMOVE QUARTER TRIM COVER LH (w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 6 clips and remove the quarter trim cover LH.



85. REMOVE QUARTER TRIM COVER RH (w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side.


86. REMOVE QUARTER TRIM LID SUB-ASSEMBLY RH

  1. Remove the quarter trim lid sub-assembly RH.



87. REMOVE SIDE TRIM BOX COVER

  1. Remove the side trim box cover.



88. REMOVE SIDE TRIM BOX


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 9 screws and side trim box.