INSTALL REAR NO. 2 SEAT ASSEMBLY (for Face to Face Seat Type)
INSTALL REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type)
Voltage Inverter -- Installation |
| 1. INSTALL VOLTAGE INVERTER |
Install the voltage inverter with the 2 bolts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
Connect the connector.
| 2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH |
 |
- HINT:
- When installing the front quarter trim panel assembly LH, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.
w/ Rear No. 2 Seat, except Face to Face Seat Type:
w/o Rear Air Conditioning System:
Connect the rear seat lock control lever cable.w/ Rear Air Conditioning System:
Connect the thermistor connector and rear seat lock control lever cable.Attach the 18 clips and 2 claws to install the front quarter trim panel assembly LH.
Install the clip and bolt.
- Torque:
- 12 N*m{122 kgf*cm, 9 ft.*lbf}
w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:
Attach the 18 clips and 2 claws to install the front quarter trim panel assembly LH.
Install the clip.
w/ Rear No. 2 Seat, except Face to Face Seat Type:
Install the rear No. 2 seat belt anchor with the bolt.- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
Text in Illustration *a Protruding Part
 |
Install the rear No. 1 seat belt anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
 |
Attach the 3 claws to install the outer lap belt anchor cover.
 |
| 3. INSTALL REAR SEAT COVER CAP (except Face to Face Seat Type) |
- HINT:
- Use the same procedure for rear seat cover caps.
Attach the 3 claws to install the rear seat cover cap.
 |
| 4. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE |
 |
Attach the 6 clips to install the rear floor mat support plate.
| 5. INSTALL REAR DOOR SCUFF PLATE LH |
 |
Attach the 3 claws and 4 clips to install the rear door scuff plate LH.
Install the screw.
| 6. INSTALL REAR STEP COVER |
- HINT:
- Use the same procedure for both rear step covers.
Attach the 2 claws to install the rear step cover.
 |
| 7. INSTALL REAR NO. 2 SEAT ASSEMBLY (for Face to Face Seat Type) |
| 8. INSTALL REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type) |