Room Temperature Sensor (For Front Side) Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Heating Air Conditioning. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

  2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

  3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

  6. REMOVE NO. 1 SWITCH HOLE BASE

  7. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

  8. REMOVE ROOM TEMPERATURE SENSOR

Room Temperature Sensor (For Front Side) -- Removal


HINT:
  1. Use the same procedures for the LHD vehicle and RHD vehicle.
  2. The procedures listed below are for the LHD vehicle.


1. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Room Temperature Sensor (For Front Side) Removal

  1. Put protective tape around the No. 2 instrument panel finish panel cushion.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.



2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the clip and screw.

  1. Detach the 8 claws.

  1. Disconnect the connectors, detach the 2 clamps and remove the lower instrument panel pad sub-assembly.



3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Room Temperature Sensor (For Front Side) Removal

  1. Place protective tape as shown in the illustration.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 3 claws and remove the No. 1 instrument cluster finish panel garnish.



4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. Place protective tape as shown in the illustration.



  1. Using a moulding remover, detach the 2 claws and remove the No. 2 instrument cluster finish panel garnish.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Room Temperature Sensor (For Front Side) Removal


    Text in Illustration
    *A
    		w/ Entry and Start System
    		*B
    		w/o Entry and Start System
    *1
    		Protective Tape
    		-
    		-


5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 screws.

  1. Detach the 3 claws.

  1. Disconnect the connectors and remove the No. 1 instrument panel under cover.



6. REMOVE NO. 1 SWITCH HOLE BASE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws.

  1. Disconnect the connectors and remove the No. 1 switch hole cover.



7. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Room Temperature Sensor (For Front Side) Removal

  1. Using a screwdriver, detach the 2 claws and open the hole cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


  1. w/ Driver Side Knee Airbag:

    1. Remove the 2 bolts.



    2. Detach the 16 claws.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Room Temperature Sensor (For Front Side) Removal



  1. w/o Driver Side Knee Airbag:

    1. Remove the 2 bolts.



    2. Detach the 9 claws.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Room Temperature Sensor (For Front Side) Removal



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. for Automatic Air Conditioning System:

    1. Detach the 2 claws and remove the room temperature sensor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and disconnect the 2 control cables.

  1. Disconnect the connectors and remove the lower No. 1 instrument panel finish panel.



8. REMOVE ROOM TEMPERATURE SENSOR


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the connector.

  1. Disconnect the hose and remove the sensor.