Compressor (For 3Ur-Fe) Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Heating Air Conditioning. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE UPPER RADIATOR SUPPORT SEAL

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

  3. REMOVE FRONT FENDER APRON SEAL LH

  4. REMOVE FAN & GENERATOR V BELT

  5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

  6. DISCONNECT SUCTION HOSE SUB-ASSEMBLY

  7. REMOVE COOLER COMPRESSOR ASSEMBLY

Compressor (For 3Ur-Fe) -- Removal



1. REMOVE UPPER RADIATOR SUPPORT SEAL


  1. Remove the 7 clips and radiator support seal.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Compressor (For 3Ur-Fe) Removal



2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

  1. Start the engine.

  1. Turn the A/C switch on.

  1. Operate the cooler compressor while the engine speed is approximately 1000 rpm for 5 to 6 minutes to circulate the refrigerant and collect the compressor oil remaining in each component into the cooler compressor.

  1. Stop the engine.

  1. Recover the refrigerant from the A/C system using a refrigerant recovery unit.



3. REMOVE FRONT FENDER APRON SEAL LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 4 clips and seal.



4. REMOVE FAN & GENERATOR V BELT


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Compressor (For 3Ur-Fe) Removal

  1. While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then insert a bar of 5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.

    Text in Illustration
    *1
    		Bar
    HINT:
    The pulley bolt for the belt tensioner has a left-hand thread.

  1. Remove the V belt.



5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and disconnect the discharge hose from the cooler compressor.

  1. Remove the O-ring from the discharge hose.

    NOTICE:
    Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.


6. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and disconnect the suction hose from the cooler compressor.

  1. Remove the O-ring from the suction hose.

    NOTICE:
    Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.


7. REMOVE COOLER COMPRESSOR ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the connector.

  1. Remove the 3 bolts and nut.

  1. Remove the stud bolt and cooler compressor.