Front Seat Outer Belt Assembly Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Seat Belt. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE FRONT DOOR SCUFF PLATE

  4. REMOVE REAR STEP COVER

  5. REMOVE REAR DOOR SCUFF PLATE

  6. REMOVE CENTER PILLAR GARNISH COVER

  7. REMOVE CENTER LOWER PILLAR GARNISH

  8. REMOVE REAR ASSIST GRIP ASSEMBLY

  9. REMOVE CENTER PILLAR GARNISH

  10. REMOVE FRONT SEAT OUTER BELT ASSEMBLY

  11. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY

Front Seat Outer Belt Assembly -- Removal


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE FRONT DOOR SCUFF PLATE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 7 claws and 4 clips, and remove the scuff plate.



4. REMOVE REAR STEP COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
Use the same procedure to remove the step cover on the other side.

  1. Detach the 2 claws and remove the step cover.



5. REMOVE REAR DOOR SCUFF PLATE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the screw.

  1. Detach the 3 claws and 4 clips, and remove the scuff plate.



6. REMOVE CENTER PILLAR GARNISH COVER
HINT:
  1. for Manual Seat:
    When removing the center pillar garnish cover, move the front seat and seatback to the foremost upright position.
  2. for Power Seat:
    When removing the center pillar garnish cover, connect the cable to the negative (-) battery terminal and operate the power seat switch to move the front seat and seatback to the foremost upright position.
  3. for Power Seat:
    After moving the front seat, disconnect the cable from the negative (-) battery terminal.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 clips and 2 guides, and remove the cover.



7. REMOVE CENTER LOWER PILLAR GARNISH


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
  1. for Manual Seat:
    When removing the center pillar garnish cover, move the front seat and seatback to the foremost upright position.
  2. for Power Seat:
    When removing the center pillar garnish cover, connect the cable to the negative (-) battery terminal and operate the power seat switch to move the front seat and seatback to the foremost upright position. After moving the front seat, disconnect the cable from the negative (-) battery terminal.

  1. Remove the bolt and seat belt anchor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and 7 clips, and remove the center lower pillar garnish.



8. REMOVE REAR ASSIST GRIP ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
Use the same procedure to remove the rear assist grip on the other side.

  1. Detach the 4 claws and remove the 2 assist grip plugs.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 bolts.

  1. Detach the 2 claws and remove the rear assist grip.



9. REMOVE CENTER PILLAR GARNISH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt.

  1. Detach the 2 clips and 2 guides.

  1. Pass the seat belt anchor through the center pillar garnish, and remove the center pillar garnish.



10. REMOVE FRONT SEAT OUTER BELT ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the nut and shoulder anchor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat Belt.Seat Belt Tension Reducer System.Front Seat Outer Belt Assembly Removal

  1. Disconnect the pretensioner connector labeled A as shown in the illustration.

  1. Disconnect the tension reducer connector labeled B.

  1. w/ Pre-Crash Safety System:
    Disconnect the pre-crash safety connector labeled C.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and seat belt.



11. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 bolts and adjuster.