Rear Seatback Heater (For 60/40 Split Seat Type 40 Side) Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Seat. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

  2. REMOVE SEAT ADJUSTER BOLT COVER

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

  4. REMOVE REAR NO. 1 SEAT RECLINING COVER RH

  5. REMOVE REAR NO. 1 SEAT RECLINING COVER LH

  6. REMOVE UPPER SEAT TRACK RAIL COVER LH

  7. REMOVE UPPER SEAT TRACK RAIL COVER RH

  8. REMOVE REAR NO. 2 SEAT LEG SIDE COVER

  9. REMOVE REAR NO. 2 SEAT PROTECTOR

  10. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH

  11. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH

  12. REMOVE REAR SEAT COVER

  13. REMOVE REAR UNDER SIDE COVER LH

  14. REMOVE REAR SEAT UNDER TRAY COVER RH

  15. REMOVE SEAT CUSHION COVER WITH PAD

  16. REMOVE REAR SEATBACK COVER

  17. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH

  18. REMOVE REAR SEAT HEADREST ASSEMBLY

  19. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

  20. REMOVE SEATBACK COVER WITH PAD

  21. REMOVE REAR SEPARATE TYPE SEATBACK COVER

  22. REMOVE REAR SEATBACK HEATER ASSEMBLY

Rear Seatback Heater (For 60/40 Split Seat Type 40 Side) -- Removal


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE REAR NO. 1 SEAT ASSEMBLY RH
  1. Remove the rear No. 1 seat assembly (Click here).



2. REMOVE SEAT ADJUSTER BOLT COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Using a screwdriver, detach the 2 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the screw and release handle.



4. REMOVE REAR NO. 1 SEAT RECLINING COVER RH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Rear Seatback Heater (For 60/40 Split Seat Type 40 Side)  Removal
  1. Remove the 2 screws.

  1. Detach the 3 claws in the order shown in the illustration, and then remove the cover.



5. REMOVE REAR NO. 1 SEAT RECLINING COVER LH


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the 2 screws.

  1. Detach the 4 claws and remove the cover.



6. REMOVE UPPER SEAT TRACK RAIL COVER LH


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Using a screwdriver, detach the 2 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


7. REMOVE UPPER SEAT TRACK RAIL COVER RH


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Using a screwdriver, detach the 2 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


8. REMOVE REAR NO. 2 SEAT LEG SIDE COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the 4 screws and detach the 3 claws.



    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the bolt that is securing the fold seat stopper band and remove the seat leg side cover together with the fold seat stopper band.



9. REMOVE REAR NO. 2 SEAT PROTECTOR


    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. w/ Rear Seat Side Airbag:
    Detach the claw and remove the wire harness connector.

  1. w/ Seat Heater System:
    Detach the claw and remove the wire harness connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Using a clip remover, remove the clip.

  1. Detach the claw and remove the seat protector from the seat hinge.

  1. Detach the 2 claws, open the protector and remove the wire harness.



10. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the 2 nuts and hinge.



11. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. w/ Rear Seat Side Airbag:
    Detach the wire harness clamp.

  1. w/ Seat Heater System:
    Detach the wire harness clamp.

  1. Remove the 2 nuts and hinge.



    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Detach the cable clamp and disconnect the cable.



12. REMOVE REAR SEAT COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Detach the 12 claws.



    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the 3 screws.

  1. Detach the 2 claws and remove the cover.



13. REMOVE REAR UNDER SIDE COVER LH


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the 5 screws.

  1. Detach the clip and 2 claws, and remove the cover.



14. REMOVE REAR SEAT UNDER TRAY COVER RH


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the 2 screws.

  1. Detach the 4 claws and remove the cover.



15. REMOVE SEAT CUSHION COVER WITH PAD
  1. w/ Rear Seat Side Airbag:

    1. Detach the side airbag wire harness clamps.

    2. Remove the side airbag wire harness through the hole in the seat cushion.



  1. w/ Seat Heater System:



      Land Cruiser. Urj200, 202 Grj200 Vdj200
    1. Disconnect the 2 seat heater connectors.



    2. Land Cruiser. Urj200, 202 Grj200 Vdj200
    3. Remove the seatback heater wire harness through the hole in the seat cushion.

  1. Remove the seat cushion cover with pad.



16. REMOVE REAR SEATBACK COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Rear Seatback Heater (For 60/40 Split Seat Type 40 Side)  Removal
  1. Using a screwdriver, detach the 4 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


17. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Detach the 2 claws on the top of the board.

  1. Pull up the board to detach the 2 claws on the bottom of the board and remove it.



18. REMOVE REAR SEAT HEADREST ASSEMBLY


19. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Detach the 4 claws and remove the 2 supports.



20. REMOVE SEATBACK COVER WITH PAD


    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the hog rings.



    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. w/ Rear Seat Side Airbag:

    1. Remove the cap nut and seatback cover bracket from the seat frame.

    2. Remove the side airbag wire harness through the hole in the seatback.



  1. w/ Seat Heater System:



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Rear Seatback Heater (For 60/40 Split Seat Type 40 Side)  Removal
    1. Cut the cable tie and disconnect the seatback heater wire harness.



    2. Land Cruiser. Urj200, 202 Grj200 Vdj200
    3. Remove the seatback heater wire harness through the hole in the seatback.

  1. Remove the seatback cover with pad.



21. REMOVE REAR SEPARATE TYPE SEATBACK COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. w/ Rear Seat Side Airbag:
    Disconnect the seatback cover bracket from the seatback pad.



    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the hog rings and rear seatback cover.



22. REMOVE REAR SEATBACK HEATER ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Cut off the tack pins which fasten the seatback heater to the seatback cover, and then remove the seatback heater from the seatback cover.