Rear No. 2 Seat Assembly (Except Face To Face Seat Type) Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Seat. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY LH (w/ Rear Center Seat Headrest)

  2. REMOVE REAR SEAT CUSHION HINGE COVER LH

  3. REMOVE REAR NO. 2 SEAT HINGE COVER LH

  4. REMOVE REAR NO. 2 SEAT ASSEMBLY

  5. REMOVE REAR STEP COVER

  6. REMOVE REAR DOOR SCUFF PLATE LH

  7. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

  8. REMOVE REAR SEAT COVER CAP

  9. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

  10. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

  11. REMOVE REAR ROOF NO. 1 AIR DUCT (w/ Rear Air Conditioning System)

  12. REMOVE FOLD SEAT LEG LOCK SUB-ASSEMBLY

  13. REMOVE NO. 3 SEAT CUSHION COVER

  14. REMOVE REAR SEAT LOCK STRIKER SUB-ASSEMBLY

Rear No. 2 Seat Assembly (Except Face To Face Seat Type) -- Removal


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY LH (w/ Rear Center Seat Headrest)


2. REMOVE REAR SEAT CUSHION HINGE COVER LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Operate the rear seat headrest handle and lower the headrest.



    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Operate the reclining adjuster release handle and fold down the seat.



    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Operate the seat cushion lock release lever and move the seat to the storage position.



    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Using a screwdriver, detach the 3 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE REAR NO. 2 SEAT HINGE COVER LH


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Detach the 2 claws and clip, and then remove the cover.



4. REMOVE REAR NO. 2 SEAT ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the 4 bolts and seat assembly.

    NOTICE:
    Be careful not to damage the vehicle body.


5. REMOVE REAR STEP COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
Use the same procedure to remove the step cover on the other side.
  1. Detach the 2 claws and remove the step cover.



6. REMOVE REAR DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the screw.

  1. Detach the 3 claws and 4 clips, and remove the scuff plate.



7. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Detach the 6 clips and remove the support plate.



8. REMOVE REAR SEAT COVER CAP


Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Rear No. 2 Seat Assembly (Except Face To Face Seat Type)  Removal
HINT:
Use the same procedure to remove the rear seat cover cap on the other side.
  1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.

    HINT:
    Tape the screwdriver tip before use.


9. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH
  1. w/ Sliding Roof:
    Remove the front quarter trim panel assembly LH (Click here).

  1. w/o Sliding Roof:
    Remove the front quarter trim panel assembly LH (Click here).



10. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH
  1. Detach the 4 claws and remove the seat lock control lever.



11. REMOVE REAR ROOF NO. 1 AIR DUCT (w/ Rear Air Conditioning System)


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Detach the 2 claws and remove the cooler plate.



    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the clip and duct.



12. REMOVE FOLD SEAT LEG LOCK SUB-ASSEMBLY
  1. Detach the 2 cable clamps.



    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the 2 nuts and fold seat leg lock.



13. REMOVE NO. 3 SEAT CUSHION COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Detach the 4 clips and 16 claws, and then remove the 4 seat cushion covers.



14. REMOVE REAR SEAT LOCK STRIKER SUB-ASSEMBLY
  1. Fold back the floor carpet.



    Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Remove the 8 bolts and 4 seat lock strikers.