Front Seat Assembly (For Bench Seat Type) Reassembly

Using a T40 "TORX" socket wrench, install the front seat outer track assembly RH together with the front seat reinforcement with the 5 "TORX" bolts.

Torque:

25 N*m{255 kgf*cm, 18 ft.*lbf}

Using a T40 "TORX" socket wrench, install the front seat inner track assembly RH with the 5 "TORX" bolts.

Torque:

25 N*m{255 kgf*cm, 18 ft.*lbf}

Attach the 2 springs to install the seat track adjusting handle as shown in the illustration.

Attach the claw to install the front seat lower cushion shield RH.

Install the reclining adjuster outside cover LH with the screw.

Attach the guide.

Install the reclining adjuster inside cover LH with the screw.

Apply double-sided tape as shown in the illustration.

Install the front seatback protector.

Attach the fastening tape to temporarily install the separate type front seatback cover to the separate type front seatback pad.

Using hog ring pliers, install new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

Set the seatback cover with pad in place.

Attach the 4 claws to install the 2 front seat headrest supports.

Attach the fastening tape.

Attach the 2 hooks.

Using hog ring pliers, install new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

Using hog ring pliers, install new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

Close the 2 fasteners to install the seatback cover with pad.

Attach the claw and clip to install the front seat inner cushion shield RH.

Install the screw.

Install the center seat hinge cover with the screw.

Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

Set the seat cushion cover with pad in place.

Using hog ring pliers, install new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

Attach the hooks to install the seat cushion cover with pad.

Install the 2 front seat cushion edge protectors.

Return the 2 cushion edge tabs to their original positions.

NOTICE:

Be careful not to break the cushion edge tabs.

Set the front seatback side cover sub-assembly RH in place.

NOTICE:

Be careful not to damage the cover.

Install the front seatback inside pad RH.

Attach the fastening tape to install the front seatback side cover sub-assembly RH.

NOTICE:

1. Be careful not to damage the cover.
   
2. When attaching the fastening tape, avoid wrinkling the cover.
   

Install the front seat armrest hole board cover to the seat armrest assembly RH.

Install the seat armrest assembly RH with the bolt.

Torque:

37 N*m{377 kgf*cm, 27 ft.*lbf}

Install the inner seat bracket assembly RH with the 4 bolts.

Torque:

37 N*m{377 kgf*cm, 27 ft.*lbf}

Attach the hook to install the front seat lower cushion shield RH.

Install the screw.

Attach the 2 hooks to install the front seat hinge cover RH.

Install the 2 screws.

Twist the front seat hinge knob in the direction indicated by the arrow to install it.

Attach the 2 guides and claw to install the front seat cushion shield RH.

Install the 2 screws.

Attach the 2 rubber bands.

Attach the claw to install the reclining adjuster release handle RH.

Install the front seat inner belt assembly RH with the nut.

Torque:

42 N*m{428 kgf*cm, 31 ft.*lbf}

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat.

Install the 2 seat adjuster cover caps.